图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
电信和无线电工程
SJR: 0.202 SNIP: 0.2 CiteScore™: 0.23

ISSN 打印: 0040-2508
ISSN 在线: 1943-6009

卷:
卷 78, 2019 卷 77, 2018 卷 76, 2017 卷 75, 2016 卷 74, 2015 卷 73, 2014 卷 72, 2013 卷 71, 2012 卷 70, 2011 卷 69, 2010 卷 68, 2009 卷 67, 2008 卷 66, 2007 卷 65, 2006 卷 64, 2005 卷 63, 2005 卷 62, 2004 卷 61, 2004 卷 60, 2003 卷 59, 2003 卷 58, 2002 卷 57, 2002 卷 56, 2001 卷 55, 2001 卷 54, 2000 卷 53, 1999 卷 52, 1998 卷 51, 1997

电信和无线电工程

DOI: 10.1615/TelecomRadEng.v73.i10.10
pages 851-861

AN ALGORITHM FOR ANALYZING PLANAR JUNCTIONS OF WAVEGUIDES OF ARBITRARY CROSS-SECTION WITH THE USE OF EIGENFUNCTIONS OF THE COMMON APERTURE

S. O. Steshenko
A. Usikov Institute of Radio Physics and Electronics, National Academy of Sciences of Ukraine, 12, Academician Proskura St., Kharkov 61085, Ukraine

ABSTRACT

The mode-matching technique is widely used for calculating the generalized scattering matrices of waveguide step junctions. Its applicability is confined to the case where the cross-section of one waveguide is completely inscribed into that of another waveguide. If the intersection of the two waveguides coincides with neither of them, then, as a rule, a "virtual" zero-length waveguide is artificially introduced into consideration between the jointed waveguides such that the formed new junctions would satisfy the applicability condition of the mode-matching technique. However the approach like this requires inversions of three matrices which procedure requires additional computational time. This study analyzes a possibility of using a generalization of the mode-matching technique to the case of waveguide junctions with superimposed cross-sections which leads to a set of linear algebraic equations of the first kind. It is proved that the two approaches are equivalent. At that the suggested method proves to be more efficient as compared with the tradition approach consisting in introducing a "virtual" waveguide into consideration. The results obtained in the paper make it possible to improve the efficiency of the automated design systems which are based on the mode-matching technique.