图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
机械过程图像显示


ISSN 在线: 2152-209X

Archives: Volume 1, 2011 to Volume 9, 2019

机械过程图像显示

DOI: 10.1615/VisMechProc.2018026870

GAS FLOW NEAR THE WEDGE MOUNTED ON A PLATE

Volf Ya. Borovoy
Central Aerohydrodynamic Institute (TsAGI), 1 Zhukovsky Str., Zhukovsky, Moscow Region, 140180 Russian Federation
Ivan Vladimirovich Egorov
Central Aerohydrodynamic Institute (TsAGI), 1, Zhukovsky Str., Zhukovsky, Moscow Region, 140180, Russian Federation
Vladimir Evguenyevich Mosharov
Central Aerohydrodynamic Institute (TsAGI), 1, Zhukovsky Str., Zhukovsky, Moscow Region, 140180, Russian Federation
Arkadii Sergeyevich Skuratov
Central Aerohydrodynamic Institute (TsAGI) 1, Zhukovsky str., Zhukovsky, 140180, Moscow region, Russia
Vladimir Nikolaevich Radchenko
Central Aerohydrodynamic Institute (TsAGI), 1, Zhukovsky str., Zhukovsky, 140180, Moscow region, Russia

ABSTRACT

The results of studying gas flow near a sharp wedge mounted both on sharp and blunt plates are presented. The data on the flow over a wedge mounted on the axisymmetric body (a cone or a cylinder) when the wedge dimensions are small as compared to the body curvature radius are also provided. The primary focus is on the flow structure and heat transfer in the region of the shock wave interference with the boundary layer. The flow over a wedge with a sharp leading edge is considered in this paper.