图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
国际能源材料和化学驱动期刊
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN 打印: 2150-766X
ISSN 在线: 2150-7678

国际能源材料和化学驱动期刊

DOI: 10.1615/IntJEnergeticMaterialsChemProp.2014005377
pages 383-397

EXPERIMENTAL ANALYSIS METHOD OF THE TRANSIENT BURNING RATE OF SOLID PROPELLANT UNDER RAPID PRESSURE CHANGES

Vladica Bozic
Ministry of the Environment and Spatial Planning, Omladinskih Brigada 1,11070 Novi Beograd, Serbia
Boris S. Jankovski
Veda, Aleksandar Martukov 45, 1000 Skopje, Macedonia

ABSTRACT

The term transient burning is used to describe the burning behavior of solid propellants that occurs under rapid pressure changes. In solid rocket propulsion systems, the instantaneous burning rate of a solid propellant under rapidly changing non-steady pressure could be significantly different from the steady-state burning rate corresponding to the same instantaneous pressure. This paper reports on a new method of measurement of transient burning rates together with a brief description of the experimental setup. A rapid rise in the chamber pressure was attained by using a pyro pulser added onto a specially designed forward closure of a laboratory-scale test motor that was originally used to measure the steady-state burning rate. The steady-state burning rate as well as the burning rate measured under transient pressure conditions are obtained indirectly by computing from the pressure/time history and applying the small-motor measurement method. In this way, the transient burning rate has been measured in the same motor and by applying a similar method as used for the steady-state burning rate. The example results of a medium-energy ammonium perchlorate/polyvinyl chloride binder baseline propellant formulation (75/25 mass percentage ratio) have shown that the transient burning rate differs significantly from the steady-state burning rate at the same pressure level.


Articles with similar content:

COMBUSTION AND PERFORMANCE STUDIES OF GLYCIDYL AZIDE POLYMER AND ITS MIXTURES AS HYBRID ROCKET FUEL
International Journal of Energetic Materials and Chemical Propulsion, Vol.14, 2015, issue 3
Motoyasu Kimura, Hideo Nakayama, Akshay Garg, Po-Jul Chang, Keiichi Hori, Yutaka Wada
INVESTIGATION OF SOLID OXIDIZER AND GASEOUS FUEL COMBUSTION PERFORMANCE USING AN ELEVATED PRESSURE COUNTERFLOW EXPERIMENT FOR REVERSE HYBRID ROCKET ENGINE
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 6
Grant A. Risha, Terrence L. Connell, Jr., Reed H. Johansson, Gregory Young, Richard A. Yetter
GAP DISTANCE EFFECT ON BURNING RATE OF TWO OPPOSING JA2 PROPELLANT GRAINS
International Journal of Energetic Materials and Chemical Propulsion, Vol.6, 2007, issue 6
Peter J. Ferrara
TRANSIENT BURNING BEHAVIOR OF SOLID PROPELLANTS
International Journal of Energetic Materials and Chemical Propulsion, Vol.3, 1994, issue 1-6
Yeu-Cherng Lu, F. R. Schwam, Y. J. Yim
ANALYSIS OF QUASI-STEADY AND TRANSIENT BURNING OF HYBRID FUELS IN A LABORATORY-SCALE BURNER BY AN OPTICAL TECHNIQUE
International Journal of Energetic Materials and Chemical Propulsion, Vol.12, 2013, issue 5
G. Rambaldi, M. Manzoni, Christian Paravan, Luigi T. De Luca