图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
国际能源材料和化学驱动期刊
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN 打印: 2150-766X
ISSN 在线: 2150-7678

国际能源材料和化学驱动期刊

DOI: 10.1615/IntJEnergeticMaterialsChemProp.2019028003
pages 133-155

FLOW VISUALIZATIONS WITH BACKGROUND-ORIENTED SCHLIEREN IN A TRANSPIRATION-COOLED MODEL SCRAMJET COMBUSTOR

Friedolin T. Strauss
German Aerospace Center (DLR), Institute of Space Propulsion, D-74239 Hardthausen, Germany
Stephan General
German Aerospace Center (DLR), Institute of Space Propulsion, D-74239 Hardthausen, Germany
Chiara Manfletti
European Space Agency (ESA), Headquarters, 75738 Paris Cedex 15, France
Stefan Schlechtriem
German Aerospace Center (DLR) Institute of Space Propulsion, 74239 Hardthausen, Germany

ABSTRACT

The Institute of Space Propulsion of the German Aerospace Center (DLR) has developed and set up a research test bench to investigate the applicability of transpiration cooling systems to scram-jets and to examine the resulting phenomena in the supersonic flow. It consists of a chemical hydrogen/oxygen air vitiator with attached Scramjet model combustion chamber with an optional half-wedge-shaped shock generator. The used porous media consists of high-temperature resistant stainless steel and Inconel with different porosities. Gaseous nitrogen and gaseous hydrogen were used as coolant with different pre-pressures. Optical access allows the use of a schlieren system and background-oriented schlieren (BOS) for flow investigations. Phenomena such as hot spots on the porous wall, inefficient cooling, and shock-boundary-layer interaction (SBLI) were observed in the experiments. With the BOS system, thickening of the boundary layer/boundary layer separation was demonstrated. Furthermore, the development of shock trains forced by the introduction of a secondary coolant flow can be illustrated, leading to an increased physical blockage up to the choking case. This publication summarizes the SBLI results gained by application of BOS setup and compares them with results obtained by the help of a classic schlieren setup. BOS emerged in the experiments to be less affected by changes in the refractive index of the quartz glass windows due to strong heating compared to the classic schlieren method. Challenges in optimizing the BOS systems' performance and subsequent changes in the test setup are discussed.

REFERENCES

  1. Alzner, E. and Zakkay, V., (1970) , Turbulent Boundary Layer Shock Interaction with and without Injection, 8th AIAA Aerospace Science Meeting, West-Germany, AIAA paper 70-91. DOI: 10.2514/6.1970-91

  2. Babinsky, H. and Harvey, J.K., (2011) , Shock Wave-Boundary-Layer Interactions, 1st ed., New York: Cambridge University Press, pp. 296–300.

  3. Bernicker, P., (1961) , Downstream Effects of Transpiration Cooling, J. Aeros. Sci., 28(8), pp. 658–659. DOI: 10.2514/8.9122

  4. Button, K., (2018) , Hypersonic Weapons Race, in Aerospace America (Issue June 2018), AIAA—American Institute of Aeronautics and Astronautics, accessed June 9, 2018, from https://aerospaceamerica.aiaa.org/features/hypersonic-weapons-race/.

  5. Capra, B.R., Boyce, R.R., Kuhn, M., and Hald, H., (2015) , Combustion Enhancement in a Scramjet Engine using Oxygen Enrichment and Porous Fuel Injection. J. Fluid Mech., 767, pp. 173–198. DOI: 10.1017/jfm.2015.43

  6. Dalziel, S., Hughes, G., and Sutherland, B., (2000) , Whole-Field Density Measurements by ‘Synthetic Schlieren’, Exp. Fluids, 28(4), pp. 322–335.

  7. Gascoin, N., Gillard, P., Bernard, S., Abraham, G., Bouchez, M., Daniau, E., and Toure, Y., (2006), Measurements for Fuel Reforming for Scramjet Thermal Management and Combustion Optimization: Status of the COMPARER Project, in 14th AIAA/AHI Space Planes and Hypersonic Systems and Technology Conference, Canberra, Australia, AIAA paper 2006-8005. DOI: 10.2514/6.2010-6551

  8. Gascoin, N., Fau, G., Bioud, J., and Gillard, P., (2010), Permeation of Inert and Supercritical Reactive Fluids Through Metallic and Composite Media, in 48th AIAA/ASME/SEA/ASEE Joint Propulsion Conference and Exhibit, Nashville, TN, AIAA paper 2010-6551.

  9. Gascoin, N., Fau, G., Gillard, P., Kuhn, M., Bouchez, M., and Steelant, J., (2011a), Benchmark of Experimental Determination Methods of Gas Permeabilities, in 17th AIAA Int. Space Planes and Hypersonic Systems and Technologies Conference, San Francisco, CA, AIAA paper 2011-2252.

  10. Gascoin, N. and Gillard, P., (2011b) , Supersonic Combustion of Hydrocarbon Pyrolysed Coolant with Detailed Chemistry, in 41st AIAA Fluid Dynamics Conference and Exhibit, Honolulu, HI, AIAA paper 2011-3712.

  11. Greuel, D., (2013) , Investigations on Momentum and Mass Transport in Effusion Cooled Rocket Combustion Chambers Made of Fibre Ceramics, PhD, RWTH Aachen, Germany.

  12. Hayasaka, K., Tagawa, Y., Liu, T., and Kameda, M., (2016) , Optical-Flow-Based Background-Oriented Schlieren Technique for Measuring a Laser-Induced Unterwater Shock Wave, Exper. Fluids, 57(179). DOI: 10.1007/s00348-016-2271-0

  13. Holden, M., Nowak, R., Olsen, G., and Rodriguez, K., (1990) , Experimental Studies of Shock Wave/Wall Jet Interaction in Hypersonic Flow, in 28th AIAA Aerospace Science Meeting, Reno, NV, AIAA paper 90-0607.

  14. Holden,M.S. and Sweet, S.J., (1994) , Studies of Transpiration Cooling with Interaction in Hypersonic Flow, in 25th Plasmadynamics Conf., Colorado Springs, CO, AIAA paper 94-2475.

  15. Horn, B.K.P. and Schunck, B.G., (1981) , Determing Optical Flow, Artif. Intell., 17(1-3), pp. 185–203. DOI: 10.1016/0004-3702(81)90024-2

  16. Huang, Z., Zhu, Y., Xiong, Y., and Jiang, P., (2014) , Investigation of Transpiration Cooling for Sintered Metal Porous Struts in Supersonic Flow, Appl. Therm. Eng., 70, pp. 240–249.

  17. Huang, G., Zhu, Y., Liao, Z., Ouyang, X., and Jiang, P., (2017) , Experimental Investigation of Transpiration Cooling with Phase Change for Sintered Porous Plates, Int. J. Heat Mass Transf., 114, pp. 1201–1213. DOI: 10.1016/j.ijheatmasstransfer.2017.05.114

  18. Jiang, P., Huang, G., Zhu, Y., Liao, Z., and Huang, Z., (2017) , Experimental Investigation of Combined Transpiration and Film Cooling for Sintered Metal Porous Struts, Int. J. Heat Mass Transf., 108, pp. 232– 243. DOI: 10.1016/j.ijheatmasstransfer.2016.12.014

  19. Kharbat, M., (2009) , Horn-Schunck Optical Flow Method, v 1.1.0.0, accessed August 17th, 2018, from https://de.mathworks.com/matlabcentral/fileexchange/22756-horn-schunck-optical-flow-method.

  20. Kirchhartz, R.M., (2009) , Upstream Wall Layer Effects on Drag Reduction with Boundary Layer Combustion, PhD, University of Queensland (UQ), Brisbane, Australia.

  21. Langener, T., (2011) , A Contribution to Transpiration Cooling for Aerospace Applications using CMC Walls, PhD, University of Stuttgart, Germany.

  22. Liu, Y., Jiang, P., Xiong, Y., and Wang, Y., (2013) , Experimental and Numerical Investigation of Transpiration Cooling for Sintered Porous Flat Plates, Appl. Therm. Eng., 50, pp. 997–1007.

  23. Meinert, J., (2000) , Static Friction and Heat Transfer in a Turbulent Boundary Layer during Foreign Gas Transpiration, PhD, University of Dresden, Germany.

  24. Najmi, H., Tabach, E., Chetehouna, K., Gascoin, N., and Falempin, F., (2015) , Effect of Flow Configuration on Darcian and Forchheimer Permeabilities Determination in a Porous Composite Tube, in 20th AIAA Int. Space Planes and Hypersonic Systems and Technology Conference, Glasgow, UK, AIAA paper 2015-3665, 2015.

  25. Olsen, G., Holden, M., and Baker, M., (1990), Experimental Results for Film Cooling in 2D Supersonic Flow Including Coolant Delivery Pressure, Geometry and Incident Shock Effects, in 28th AIAA Aerospace Science Meeting, Reno, NV, AIAA paper 90-605.

  26. Olsen, G.C. and Nowak, R.J., (1995) , Hydrogen Film Cooling with Incident and Swept-Shock Interactions in aMach 6.4 Nitrogen Free Stream, National Aeronautics and Space Administration,Washington,D.C., NASA Tech. Memo. 4603.

  27. Prokein, D., von Wolfersdorf, J., Dittert, C., and Bork, H., (2018), Transpiration Cooling Experiments on a CMC Wall Segment in a Supersonic Hot Gas Channel, in 2018 Int. Energy Conversion Engineering Conf., AIAA Propuls. Energy Forum, Cincinnati, OH, AIAA paper 2018-4696.

  28. Rhoby, M., Okhovat, S., Kerst, A., Gross, K., and Ombrello, T., Preliminary Investigation of Scramjet Fueling Flowfield with Hyperspectral Imaging, in 53rd AIAA/SAE/ASEE Joint Propuls. Conf., AIAA Propuls. Energy Forum, Atlanta, GA, AIAA paper 2017-4646.

  29. Ruhnau, P., Kohlberger, T., Schn¨orr, C., and Nobach, H., (2005) , Variational Optical Flow Estimation for Particle Image Velocimetry, Exper. Fluids, 38(21).

  30. Serbest, E., (2001) , Investigations on Application of Effusion Cooling in Rocket Combustion Chambers, PhD, RWTH Aachen, Germany.

  31. Settles, G.S., (2001) , Schlieren and Shadowgraph Techniques, 1st ed., New York: Springer-Verlag, pp. 39–48.

  32. Settles, G.S. and Hargather, M., (2017) , A Review of Recent Developments in Schlieren and Shadowgraph Techniques, Measurement Sci. Technol., 28, p. 042001.

  33. Sholto, F., Smart, M.K., Kearney, M.P., and Jahn, I., (2018) , Flyback of the SPARTAN Scramjet-Powered Launch Vehicle, in 2018 AIAA Aerospace Science Meeting, Kissimmee, FL, AIAA paper 2018-2177.

  34. Song, K., Choi, S., and Scotti, S., (2006) , Transpiration Cooling Experiment for Scramjet Engine Combustion Chamber by High Heat Fluxes, J. Propuls. Power, 22(1), pp. 96–102. DOI: 10.2514/1.11300

  35. Speier, R., Nacouzi, G., Lee, C., and Moore, R., (2017) , Hindering the Spread of a New Class of Weapons, in Hypersonic Missile Nonproliferation, Santa Monica, CA: RAND Corporation.

  36. Strauss, F., Manfletti, C., Lieberwirth, R., and Schlechtriem, S., (2016) , Experimental Setup on Transpiration Cooling in Supersonic Combustion Ramjets (Scramjets), in 5th Space Propuls. Conf., May 2–6, Rome, Italy.

  37. Strauss, F., Woessner, M., Weisswange, M., Manfletti, C., and Schlechtriem, S., (2017a), Experiments on Flow Interaction in a Transpiration Cooled Model Scramjet, in 7th European Conf. of Aeronautics and Space Sciences (EUCASS), July 3–6, Milan, Italy, EUCASS paper 2017-235. DOI: 10.13009/EUCASS2017-235

  38. Strauss, F.,Witte, J., Weisswange, M., Manfletti, C., and Schlechtriem, S., (2017b), Experiments on Shock- Boundary Layer Interaction and Cooling Efficiency in a Transpiration Cooled Model Scramjet, in 53rd AIAA/SAE/ASEE Joint Propuls. Conf., Atlanta, GA, AIAA paper 2017-4833.

  39. Strauss, F., Witte, J., Manfletti, C., and Schlechtriem, S., (2018a) , Experiments on Nitrogen and Hydrogen Transpiration Cooling in Supersonic Combustion Ramjets (Scramjets), in 6th Space Propuls. Conf.,May 14–18, Seville, Spain.

  40. Strauss, F.,Witte, J, General, S., Manfletti, C., and Schlechtriem, S., (2018b), Experiments on Nitrogen and Hydrogen Transpiration Cooling in a Model Scramjet Combustor, in 2018 Joint Propuls. Conf., AIAA Propulsion and Energy Forum, Cincinnati, OH, AIAA paper 2018-4932. DOI: 10.2514/6.2018-4932

  41. Taddeo, L., Gascoin, N., Fedioun, I., Chetehouna, K., Lamoot, L., and Fau, G., (2015), High-End Experiments on Regenerative Cooling: Test Bench Design, in 20th AIAA Int. Space Planes and Hypersonic Systems and Technologies Conf., Glasgow, UK, AIAA paper 2015-3664, 2015. DOI: 10.2514/6.2015- 3664

  42. Wheeler, J. and Ganji, A., (2010) , Introduction to Engineering Experimentation, 3rd ed., London: Pearson, pp. 206–207.

  43. Zierep, J., Bohning, R., and Doerffer, P., (2002) , Perforated Plate Aerodynamics for Passive Shock Control, IUTAM Symp. Transsonicum IV, Proc. of the IUTAM Symposium, G¨ottingen, Germany, September 2–6, 2002, pp. 125–130.