每年出版 18 期
ISSN 打印: 1064-2285
ISSN 在线: 2162-6561
Indexed in
EFFECTS OF IMPINGEMENT PARAMETERS ON IMPINGING-FILM COOLING PERFORMANCE
摘要
Impinging-film cooling is a kind of hybrid cooling, in which the cooling effectiveness would be influenced by the impingement characteristics. Thus, this paper investigates the effects of impinging parameter variations on the performance of impinging-film cooling. The impinging parameters include jet inclination (30°, 45°, 60°, and 90°), jet-to-slab spacing (1 mm, 1.5 mm, and 2 mm), and jet hole diameter (d = 1 mm, 1.2 mm, and 1.6 mm). In addition, numerical simulation was employed to help in understanding the flow field changes caused by different impinging parameters. The results show that the jet inclination of 90° has higher cooling effectiveness compared to other ones due to the lower turbulent intensities. A smaller jet-to-plate spacing is conducive to the liner cooling attributed to its higher slot velocity. The jet diameter of 1.2 mm shows a great capacity for liner cooling estimated by the cooling effectiveness. An optimal collocation of jet diameter and spanwise hole-to-hole spacing may exist with fixed total jet area according to the cooling effectiveness. The changes of velocity and turbulence intensity distribution due to different impinging parameters account for the difference of cooling effectiveness.
-
Caliskan, S., Baskaya, S., and Calisir, T., Experimental and Numerical Investigation of Geometry Effects on Multiple Impinging Air Jets, Int. J. Heat Mass Transf., vol. 75, no. 6, pp. 685-703, 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.04.005.
-
Celik, I.B., Ghia, U., Roache, P.J., Fretias, C.J., et al., Procedure for Estimation and Reporting of Uncertainty Due to Discretization in CFD Applications, J. Fluids Eng., vol. 130, 2008. DOI: 10.1115/1.2960953.
-
Chen, L.L., Brakmann, R.G.A., Weigand, B., et al., Detailed Investigation of Staggered Jet Impingement Array Cooling Performance with Cubic Micro Pin Fin Roughened Target Plate, Appl. Therm. Eng., vol. 171, 2020. DOI: 10.1016/j.applthermaleng. 2020.115095.
-
Cruz, C.A., Experimental and Numerical Characterization of Turbulent Slot Film Cooling, PhD, University of Maryland, 2008.
-
Fawzy, H., Zheng, Q., and Jiang, Y.T., Impingement Cooling Using Different Arrangements of Conical Nozzles in a Film Cooled Blade Leading Edge, Int. Commun. Heat Mass Transf., vol. 112, 2020. DOI: 10.1016/j.icheatmasstransfer. 2020.104506.
-
Fechter, S., Terzis, A., Ott, P., et al., Experimental and Numerical Investigation of Narrow Impingement Cooling Channels, Int. J. Heat Mass Transf., vol. 67, pp. 1208-1219, 2013. DOI: 10.1016/j.ijheatmasstransfer.2013.09.003.
-
Gil, P. and Wilk, J., Heat Transfer Coefficients during the Impingement Cooling with the Use of Synthetic Jet, Int. J. Therm. Sci., vol. 147, 2020. DOI: 10.1016/j.ijthermalsci.2019.106132.
-
Jubasz, A.J. and Marek, C.J., Combustor Liner Film Cooling in the Presence of High Free-Stream Turbulence, NASA, Washington, D.C., NASA-TN-D-6360, 1971.
-
Khangembam, J., Singh, D., Handique, J., et al., Experimental and Numerical Study of Air-Water Mist Jet Impingement Cooling on a Cylinder, Int. J. Heat Mass Transf., vol. 150, 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.119368.
-
Laraia, M., Manna, M., Cinque, G., et al., A Combustor Liner Cooling System Design Methodology Based on a Fluid/Structure Approach, Appl. Therm. Eng., vol. 60, pp. 105-121, 2013.
-
Lebedev, V.P., Lemanow, V.V., and Terekhov, V.I., Heat Transfer in a Wall Jet at High Turbulence of Concurrent Stream, Int. J. Heat Mass Transf., vol. 42, no. 4, pp. 599-612, 1999. DOI: 10.1016/s0017-9310(98)00180-x.
-
Lee, J., Ren, Z., Ligrani, P., et al., Cross-Flow Effects on Impingement Array Heat Transfer with Varying Jet-to-Target Plate Distance and Hole Spacing, Int. J. Heat Mass Transf., vol. 75, pp. 534-544, 2014. DOI: 10.1016/j.ijheatmasstransfer. 2014.03.040.
-
Liu, L., Zhu, X., Liu, H., et al., Effect of Tangential Jet Impingement on Blade Leading Edge Impingement Heat Transfer, Appl. Therm. Eng., vol. 130, pp. 380-1390, 2017. DOI: 10.1016/j.applthermaleng.2017.11.134.
-
Lotz, G.R.D., Thompson, B.E., and Konings, C.A., Numerical Uncertainties in Transonic Flow Calculations for Aerofoils with Blunt Trailing Edges, Int. J. Numer. Methods Fluids, vol. 24, pp. 355-373, 1997.
-
Mongia, H.C., Engineering Aspects of Complex Gas Turbine Combustion Mixers. Part I: High ΔT, 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum & Aerospace Exposition, Orlando, Florida, 2011. DOI: 10.2514/6.2011-107.
-
Ortega-Casanova, J. and Granados-Ortiz, F.J., Numerical Simulation of the Heat Transfer from a Heated Plate with Surface Variations to an Impinging Jet, Int. J. Heat Mass Transf., vol. 76, no. 6, pp. 128-143, 2014. DOI: 10.1016/j.ijheatmasstransfer. 2014.04.022.
-
Roache, P.J., Quantification of Uncertainty in Computational Fluid Dynamics, Annu. Rev. Fluid Mech., vol. 29, pp. 123-160, 1997.
-
Shanley, A.I., Cooling Systems: Energy, Engineering and Applications, Hauppage, NY: Nova Science Publishers Inc., pp. 37-68, 2011.
-
Simon, F.F., Jet Model for Slot Film Cooling with Effect of Free-Stream and Coolant Turbulence, NASA, Washington, D.C., NASA Technical Paper 2655, 1986.
-
Sturgess, G.J., Correlation of Data and Prediction of Effectiveness from Film Cooling Injection Geometries of a Practical Nature, Proc. of an International Propulsion Symposium Held at the College of Aeronautics, Cranfi eld, UK, pp. 229-50, 1969.
-
Tan, X.M., Liu, B., Zhu, X.D., et al., Experimental Study of Cooling with a Mist/Air Impinging Jet, J. Eng. Thermophys., vol. 34, no. 12, pp. 2228-2331, 2013. DOI: 10.1002/2013GL058999.
-
Taslim, M.E., Spring, S.D., and Mehlman, B.P., An Experimental Investigation of Film Cooling Effectiveness for Slots of Various Exit Geometries, J. Thermophys. Heat Transf., vol. 6, no. 2, pp. 302-307, 1992. DOI: 10.2514/6.1990-2266.
-
Wan, C., Rao, Y., and Chen, P., Numerical Predictions of Jet Impingement Heat Transfer on Square Pin-Fin Roughened Plates, Appl. Therm. Eng., vol. 80, pp. 301-309, 2015. DOI: 10.1016/j.applthermaleng.2015.01.053.
-
Wei, J., Zhang, J., He, X., et al., Effectiveness of Impinging-Film Cooling for Different Inducting Slabs, Heat Transf. Res., vol. 50, pp. 1285-1305, 2019. DOI: 10.1615/HeatTransRes.2019025848.
-
Xie, G., Liu, C.L., Ye, L., et al., Effects of Impingement Gap and Hole Arrangement on Overall Cooling Effectiveness for Impingement/Effusion Cooling, Int. J. Heat Mass Transf., vol. 152, 2020. DOI: 10.1016/j.ijheatmasstransfer. 2020.119449.
-
Zhang, J.Z., Zhang, S.C., Wang, C.H., et al., Recent Advances in Film Cooling Enhancement: A Review, Chin. J. Aeronaut., 2020. DOI: 10.1016/j.cja.2019.12.023.
-
Zhou, J.F., Wang, X.J., Li, J., et al., Comparison between Impingement/Effusion and Double Swirl/Effusion Cooling Performance under Different Effusion Hole Diameters, Int. J. Heat Mass Transf., vol. 141, pp. 1097-1113, 2019a. DOI: 0.1016/j. ijheatmasstransfer.2019.07.055.
-
Zhou, W.W., Yuan, L., Wen, X., et al., Enhanced Impingement Cooling of a Circular Jet Using a Piezoelectric Fan, Appl. Therm. Eng., vol. 160, 2019b. DOI: 10.1016/j.applthermaleng.2019.114067.
-
Zuckerman, N. and Lior, N., Jet Impingement Heat Transfer: Physics, Correlations, and Numerical Modeling, Adv. Heat Transf., vol. 39, no. 6, pp. 565-631, 2006. DOI: 10.1016/S0065-2717(06)39006-5.