图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
传热学
影响因子: 0.404 5年影响因子: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN 打印: 1064-2285
ISSN 在线: 2162-6561

传热学

DOI: 10.1615/HeatTransRes.2013006087
pages 473-482

NUMERICAL SIMULATION OF THE AIR FLOW FIELD IN THE MELT BLOWING PROCESS WITH THE USE OF AN AUXILIARY NOZZLE

Yuanling Cheng
College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, Suzhou 215006, China
Lili Wu
College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, Suzhou 215006, China
Ting Chen
College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, Suzhou 215006, China

ABSTRACT

The melt blowing process can produce ultrafine fibers. Adding an auxiliary nozzle is helpful to further decrease the fiber diameter. The air flow field of the melt blowing process with the use of an auxiliary nozzle is simulated numerically. The simulation results are compared with analytical calculation results and experimental data. The results provide a good foundation for modeling the polymer drawing in our further researches on improving the melt blowing technology.


Articles with similar content:

EFFECT OF OSCILLATING AIR JETS ON POLYMER DRAWING IN THE MELT BLOWING PROCESS
Heat Transfer Research, Vol.44, 2013, issue 5
Ting Chen, Lili Wu
Metal Matrix Composite processing by injection : numerical modelling at the fibre scale
International Heat Transfer Conference 12, Vol.59, 2002, issue
Stephane Vincent, Michel Danis, Eric Arquis, Arthur Cantarel, Eric Lacoste
Heat Exchange in the Cross-Countercurrent Freeboard Furnace with Gas Distribution Nonuniformity
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 1979, issue
Ya. M. Gordon, B. A. Bokovikov, V. G. Voskoboinikov, Yu. G. Yaroshenko, V. S. Shvydkii, E. N. Vasilyev
VIABILITY OF THE LIQUID-LIQUID SEPARATION OF CADMIUM FROM PHOSPHORIC ACID USING ALIQUAT 336 AS EXTRACTANT
ICHMT DIGITAL LIBRARY ONLINE, Vol.5, 1997, issue
Inmaculada Ortiz, A. M. Urtiaga, A. Irabien, S. Zamacona
INVESTIGATION OF APPLICABILITY OF DUAL-POROSITY MODEL FOR POLYMER FLOODING SIMULATION
Journal of Porous Media, Vol.21, 2018, issue 13
Behnam Sedaee Sola, Assila Taymourtash