图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
传热学
影响因子: 0.404 5年影响因子: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN 打印: 1064-2285
ISSN 在线: 2162-6561

传热学

DOI: 10.1615/HeatTransRes.2016015276
pages 827-848

NUMERICAL SIMULATION OF A BELLOWS-TYPE RECIPROCATING MECHANISM-DRIVEN HEAT LOOP (RMDHL)

Olubunmi T. Popoola
Department of Mechanical and Materials Engineering, Florida International University, Miami, Florida 33174, USA
Soheil Soleimani
Department of Mechanical and Materials Engineering, Florida International University, Miami, Florida 33174, USA
Yiding Cao
Department of Mechanical and Materials Engineering, Florida International University, Miami, Florida 33174

ABSTRACT

A bellows-type Reciprocating Mechanism-Driven Heat Loop (RMDHL) could attain a high heat transfer rate through reciprocating flow of the working fluid inside a heat transfer device while maintaining substantial temperature uniformity over its evaporator section. The objective of this paper is to numerically simulate a bellows-type RMDHL to predict its operational performance under different working conditions as well as a conventional dynamic pump-driven heat loop (DPDHL) as a benchmark for comparison. The numerical results are also compared with relevant experimental data with good agreement. The results indicate that the bellows-type RMDHL can meaningfully reduce the peak temperature of an electronic device and result in a significantly more uniform temperature across the electronic device. Considering the advantage of coolant leakage free for electronics-related applications, the single-phase bellows-type RMDHL could be an alternative to a conventional Liquid Cooling System (LCS) for electronic cooling applications.


Articles with similar content:

EXPERIMENTAL INVESTIGATION OF A WASTE HEAT DRIVEN TURBO-COMPRESSION CHILLER
3rd Thermal and Fluids Engineering Conference (TFEC), Vol.1, 2018, issue
Derek N. Young, Larry W. Gabbey, Michael J. Reinke, John R. Simon III, Jeff Noall, Ranga V. Sami, Alex M. Grauberger, Jeff Shull, Shane D. Garland, Robert Fuller, Kevin Eisemann, Todd M. Bandhauer
TRANSIENT VOID FRACTION PREDICTIONS AT ELEVATED PRESSURES IN ONCE-THROUGH INTEGRAL SYSTEM
International Heat Transfer Conference 8, Vol.5, 1986, issue
Yassin A. Hassan
DEVELOPMENT AND INVESTIGATION OF A COOLER FOR ELECTRONICS ON THE BASIS OF TWO-PHASE LOOP THERMOSYPHONS
Heat Pipe Science and Technology, An International Journal, Vol.1, 2010, issue 1
Yury F. Maydanik, Valery I. Dmitrin, Vladimir G. Pastukhov
Co-current Loop Thermosyphon with Active Working Fluid Management: Application for Water Recovery in Flue Gas
First Thermal and Fluids Engineering Summer Conference, Vol.6, 2015, issue
Wei Zhong, Tao He, Jon P. Longtin, Shanshan Huang
L-Shaped Thermosyphon Loop with Vertical Evaporator for Power Electronics Cooling
International Heat Transfer Conference 15, Vol.12, 2014, issue
Thomas B. Grandinger, Francesco Agostini