图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
多孔介质期刊
影响因子: 1.752 5年影响因子: 1.487 SJR: 0.43 SNIP: 0.762 CiteScore™: 2.3

ISSN 打印: 1091-028X
ISSN 在线: 1934-0508

卷:
卷 23, 2020 卷 22, 2019 卷 21, 2018 卷 20, 2017 卷 19, 2016 卷 18, 2015 卷 17, 2014 卷 16, 2013 卷 15, 2012 卷 14, 2011 卷 13, 2010 卷 12, 2009 卷 11, 2008 卷 10, 2007 卷 9, 2006 卷 8, 2005 卷 7, 2004 卷 6, 2003 卷 5, 2002 卷 4, 2001 卷 3, 2000 卷 2, 1999 卷 1, 1998

多孔介质期刊

DOI: 10.1615/JPorMedia.v20.i11.20
pages 971-976

PREPARATION AND CHARACTERIZATION OF Co-Cu BIMETALLIC SHAPED CATALYST SUPPORTED ON TiO2

Vida Nourozi Rad
Department of Chemistry, Science and Research Branch, Islamic Azad University, Poonak-Hesarak, Tehran, Iran
Mansoor Anbia
Research Laboratory of Nanoporous Materials, Faculty of Chemistry, Iran University of Science and Technology, Farjam Street, Narmak, P.O. Box 16846-13114, Tehran, Iran
Moayed Hossaini Sadr
Department of Chemistry, Science and Research Branch, Islamic Azad University, Poonak-Hesarak, Tehran, Iran
Karim Zare
Department of Chemistry, Science and Research Branch, Islamic Azad University, Poonak-Hesarak, Tehran, Iran

ABSTRACT

Bimetallic Co-Cu/TiO2 catalyst was prepared through a co-impregnation method with anatase-TiO2 as support. The catalyst powder was shaped by three different binders (bentonite, polyvinyl alcohol, and polyethylene glycol) into extrudes. Samples were characterized using X-ray powder diffraction, temperature-programmed reduction (TPR), Brunauer–Emmett–Teller analysis, Barrett–Joyner–Halenda analysis, scanning electron microscopy (SEM), and energy dispersive X-ray techniques. Among the catalysts prepared, an optimal catalyst with the composition 65% TiO2 and a mixture of 1% polyvinyl alcohol, 2% PEG-1000, and 25% bentonite was selected with suitable properties. The specific surface area of the catalyst was found to be 127 m2·g-1 with a pore diameter of 9.28 nm. TPR results reveal that the presence of Cu lowers the reduction temperature of Co. The TPR profile is in good agreement with the results shown by SEM that the metal species were well dispersed over the TiO2 support.


Articles with similar content:

INFLUENCE OF PROCESSING CONDITIONS ON COMPRESSIVE STRENGTH AND CO2 ADSORPTION OF UiO-66 PELLETS
International Heat Transfer Conference 16, Vol.5, 2018, issue
Xun Zhu, Jiajia Yang, Yu-Dong Ding, Qiang Liao, Q.W. Liu
V2O5/HMS AS NOVEL CATALYST FOR PRODUCTION OF 1,1'-BI-2-NAPHTHOL BY OXIDATIVE C-C COUPLING OF 2-NAPHTHOL: ACTIVITY, SELECTIVITY AND KINETICS
Catalysis in Green Chemistry and Engineering, Vol.3, 2020, issue 1
Jeetendra Y. Salunke, Ganapati D. Yadav
SYNTHESIS AND CHARACTERIZATION OF CADMIUM SULFIDE NANOPARTICLES-BASED INK USING A CHEMICAL PRECIPITATION TECHNIQUE
Nanoscience and Technology: An International Journal, Vol.4, 2013, issue 3
Zain Akram, Maleeha Qasim
MESOPOROUS Ni/NiO-SiO2 FOR EFFECTIVE HYDRODEOXYGENATION OF STEARIN INTO DIESEL RANGE HYDROCARBONS
Catalysis in Green Chemistry and Engineering, Vol.1, 2018, issue 2
Anil K. Sinha, Hari Singh
PRODUCTION OF p-CYMENE BY ALKYLATION OF TOLUENE WITH PROPAN-2-OL
Catalysis in Green Chemistry and Engineering, Vol.2, 2019, issue 2
Mannepalli Lakshmi Kantam, Ajayan Vinu, Gunjan P. Deshmukh, Snehal R. Gajbhiye