图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
多孔介质期刊
影响因子: 1.49 5年影响因子: 1.159 SJR: 0.43 SNIP: 0.671 CiteScore™: 1.58

ISSN 打印: 1091-028X
ISSN 在线: 1934-0508

多孔介质期刊

DOI: 10.1615/JPorMedia.v12.i5.20
pages 403-415

Shrinkage/Swelling Behavior of Knitted Fabrics during Relative Humidity Cycles Determined by X-ray Imaging

N. Bhouri
LERMAB-UMRINRA 1093, ENGREF 14, rue Girardet, 54042 Nancy Cedex, France; and LESTE, ENIM Avenue IBN ELJAZZAR, 5019 Monastir, Tunisie
Eric Badel
LERMAB-UMRINRA 1093, ENGREF 14, rue Girardet, 54042 Nancy Cedex, France
Sassi Ben Nasrallah
Laboratoire d'Études des Systèmes Thermiques et Énergétiques, Ecole Nationale d'Ingénieurs de Monastir, Monastir 5019 Tunisie
Patrick Perre
Laboratoire de Genie des Procedes et des Materiaux, Ecole Centrale Paris, CentraleSupelec, campus de Chatenay-Malabry Grande Voie des Vignes F-92 295 Chatenay-Malabry Cedex, Paris, France

ABSTRACT

The 2D deformation of knitted jersey ready-to-wear clothing made of cotton was measured during adsorption and desorption steps. A digital x-ray imaging system was coupled with a climatic chamber to control temperature and relative humidity during the cycle. Images of the samples were recorded at each different equilibrium state of the cycle. Finally, an image correlation process was used to compare the recorded images and to determine the 2D strain. The deformations along course (εcc) and wale (εww) directions and the shear (εwc) were measured for four identical samples. The repeatability of the results shows the reproducibility of the measurement process. These original experimental results establish a clear anisotropic shrinkage and swelling behavior between the wale and course directions. The anisotropic ratio (εcc/εww) rises up to 2 during the adsorption step. Moreover, they enlighten a hysteresis between the adsorption and desorption steps. It denotes the effect of the material's history and it is explained by geometrical considerations of the structure at the microscopic level and the relationship with the manufacturing process. Finally, the shear strain is explained at the microscopic level by electronic microscopy (ESEM) observations that show the fibers' twist dissymmetry between the two wings of the stitch.


Articles with similar content:

THE EFFECT OF ENVIRONMENT ON HUMAN BIOENERGY (GENERAL ASPECTS OF HUMAN BIOENERGY)
Energy and the Environment, 1998, Vol.0, 1998, issue
George Przybyl-Einstein, Anna M. Przybyl
FATIGUE AND RESIDUAL STRENGTH TESTS OF THE FULL-SCALE COMPOSITE WING BOX OF A PASSENGER AIRCRAFT
TsAGI Science Journal, Vol.50, 2019, issue 3
Viktor Viktorovich Konovalov, Sergey Vsevolodovich Kulikov, Konstantin Stepanovich Shcherban, Mikhail Aleksandrovich Fedotov, Anna Yurievna Zacharenkova, Vitaliy Efimovich Strizhius, Andrey Grigorievich Yashutin
PREDICTIVE MULTISCALE MODEL OF DELAYED DEBONDING FOR CONCRETE MEMBERS WITH ADHESIVELY BONDED EXTERNAL REINFORCEMENT
Composites: Mechanics, Computations, Applications: An International Journal, Vol.3, 2012, issue 4
Paolo Foraboschi
FLOW REGIONS OF GRANULES IN DORFAN IMPINGO FILTER FOR GAS CLEANUP
Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV, Vol.0, 2000, issue
Shu-San Hsiau, Chuen-Shii Chou, Jiri Smid, Hsien-Hsin Tsai , Jing-T. Kuo
Static Stretch Training in Conditions of Simulated Microgravity Maintains Contractile Properties of Muscles?
International Journal of Physiology and Pathophysiology, Vol.2, 2011, issue 3
Yuri Koryak