每年出版 12 期
ISSN 打印: 1091-028X
ISSN 在线: 1934-0508
Indexed in
Development of a Cylindrical Porous-Medium Burner
摘要
An experimental investigation was performed to address the performance of a radial flow porous burner, fabricated from a ceramic-fiber lamellar structure with circular corrugated layers being sleeved around a perforated tube. The burner lean operation with porous medium was extended to 0.74 in terms of equivalence ratio for a methane-air mixture and burning capacities 1.7 times those with a free flame. The results indicated locally elevated flame temperatures close to the burner's submerged holes and a superior radiation performance, substantiated by a radiation efficiency of 37%. NOx levels as low as 29 ppm were obtained with a maximum CO value around 4000 ppm. Swirl was imparted through a variable-speed motor to enhance turbulence and mutual heat transfer between the gas and solid phases. Only free flames responded to rotary radial flames with extension in flame stability.
-
Mujeebu M. Abdul, Abdullah M.Z., Mohamad A.A., Development of energy efficient porous medium burners on surface and submerged combustion modes, Energy, 36, 8, 2011. Crossref
-
Hayashi T. C., Malico I., Pereira J. C.F., Effect of different downstream temperatures on the performance of a two-layer porous burner, Combustion Theory and Modelling, 14, 3, 2010. Crossref
-
Mujeebu M. Abdul, Abdullah M.Z., Bakar M.Z. Abu, Mohamad A.A., Muhad R.M.N., Abdullah M.K., Combustion in porous media and its applications – A comprehensive survey, Journal of Environmental Management, 90, 8, 2009. Crossref
-
Wood Susie, Harris Andrew T., Porous burners for lean-burn applications, Progress in Energy and Combustion Science, 34, 5, 2008. Crossref
-
Mujeebu M. Abdul, Abdullah M.Z., Bakar M.Z. Abu, Mohamad A.A., Abdullah M.K., Applications of porous media combustion technology – A review, Applied Energy, 86, 9, 2009. Crossref
-
Yu Byeonghun, Kum Sung-Min, Lee Chang-Eon, Lee Seungro, Combustion characteristics and thermal efficiency for premixed porous-media types of burners, Energy, 53, 2013. Crossref
-
Tabari N. Ghiasi, Astaraki M.R., Arabi A.H., The comparison of radial and axial flow porous burners from viewpoint of output radiative heat transfer and emissions, Coupled Systems Mechanics, 1, 3, 2012. Crossref
-
Mishra Vijay K., Mishra Subhash C., Basu Dipankar N., Simultaneous Estimation of Properties in a Combined Mode Conduction-Radiation Heat Transfer in a Porous Medium, Heat Transfer-Asian Research, 45, 8, 2016. Crossref
-
Kaushik Lav Kumar, Muthukumar P., Life cycle Assessment (LCA) and Techno-economic Assessment (TEA) of medium scale (5–10 kW) LPG cooking stove with two-layer porous radiant burner, Applied Thermal Engineering, 133, 2018. Crossref