图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
多孔介质期刊
影响因子: 1.49 5年影响因子: 1.159 SJR: 0.43 SNIP: 0.671 CiteScore™: 1.58

ISSN 打印: 1091-028X
ISSN 在线: 1934-0508

多孔介质期刊

DOI: 10.1615/JPorMedia.v19.i3.30
pages 219-232

MECHANICAL EVALUATION OF SINTERED MACROPOROUS HIGH-DENSITY POLYETHYLENE FILTER ELEMENTS FOR SHALLOW GEOTHERMAL APPLICATION

Johanna Rüther
Darmstadt Graduate School of Excellence Energy Science and Engineering, Technical University of Darmstadt, Germany
Stephan Lederer
Institute of Material Science, Department of Material Analytics, Technical University of Darmstadt, Germany
Christine Peth
University of Applied Sciences Darmstadt, Faculty of Mechanical Engineering and Plastics Technology, Germany
Ingo Sass
Darmstadt Graduate School of Excellence Energy Science and Engineering, Technical University of Darmstadt, Germany

ABSTRACT

High-density polyethylene (PE-HD) is a suitable material for the filtration of groundwater for shallow geothermal utilization based on its chemical and physical properties. The mechanical performance of filters can be evaluated by uniaxial compression. The compressive strength of sintered polymeric bodies depends on porosity, pore size, molecular weight, and bonding strength of the sintered particles to each other at ambient temperature. Mechanical parameters were analyzed for various manufactured filter and different polyethylene types. The mechanical performance of the porous filters is reduced with increasing porosity. Compressive strength of the samples increases with molecular weight of the sintered material. However, the porosity of the filters has a larger effect on the compressive strength than the molecular weight of the polyethylene type. Fracture behavior of the polymeric bodies is an indicator for bonding strength of sintered particles and consequently compressive strength. Fitting data to strength−porosity models proves that strength of the filters can be described adequately by Duckworth's model. The thermomechanical behavior for temperature range from 10° C to 40° C can be explained by the Arrhenius law. Referring to the analyzed mechanical performance at different temperatures, the utilization in shallow geothermal wells can be suggested at temperatures up to 20° C.


Articles with similar content:

OPTIMIZATION OF VIP PARAMETERS OF THE MECHANICAL PROPERTIES OF GFRP COMPOSITE
Composites: Mechanics, Computations, Applications: An International Journal, Vol.10, 2019, issue 3
Amin Abbasi Talabari, M. H. Alaei
TRANSVERSE THERMAL CONDUCTIVITY AND CONTACT CONDUCTANCE OF FIBER REINFORCED COMPOSITE MATERIALS
International Heat Transfer Conference 11, Vol.19, 1998, issue
Leroy S. Fletcher, Srinivas R. Mirmira, David F. Renzi
TRIBOMECHANICAL PERFORMANCE OF GLASS–EPOXY HYBRID COMPOSITES FILLED WITH MARBLE POWDER WITH THE TAGUCHI DESIGN AND ARTIFICIAL NEURAL NETWORK
Composites: Mechanics, Computations, Applications: An International Journal, Vol.10, 2019, issue 1
Arun Kumar Rout, Subhrajit Ray, Ashok Kumar Sahoo
Prediction of the Traffic of Telecommunication Networks
Telecommunications and Radio Engineering, Vol.62, 2004, issue 1-6
A. G. Kagramanzade
UNDRAINED MONOTONIC PORE PRESSURE RESPONSE OF SATURATED SILTY SAND SOILS
Special Topics & Reviews in Porous Media: An International Journal, Vol.3, 2012, issue 3
Tom Schanz, Noureddine Della, Mostefa Belkhatir, Ahmed Arab