图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
热管科学与技术

ISSN 打印: 2151-7975
ISSN 在线: 2151-7991

Archives: Volume 1, 2010 to Volume 8, 2017

热管科学与技术

DOI: 10.1615/HeatPipeScieTech.v5.i1-4.680
pages 589-596

AIR TO AIR THERMOSYPHON HEAT EXCHANGER FOR CABINET COOLING

Mathieu Habert
ABB Ltd. Switzerland, Corporate Research, Segelhofstrasse 1K, 5405 Daettwil, Switzerland
Bruno Agostini
ABB Ltd. Switzerland, Corporate Research, Segelhofstrasse 1K, 5405 Daettwil, Switzerland

ABSTRACT

Power electronics devices need active cooling to transfer heat from the enclosure to the ambient and maintain high ingress protection of the enclosure in order to protect the electronics from moisture and various dirt that would reduce its reliability. Air to air heat exchangers are widely used in the industry as they are cost-competitive, easy to install and maintain. On the other hand, they are inefficient and bulky. ABB holds a patent on a cost-effective modular compact thermosyphon based air to air heat exchanger for power electronics cabinet. This technology uses numerous multiport extruded tubes with capillary sized channels disposed in parallel to achieve the desired compactness. The experimental performance of this novel power electronics cooling system with R134a are presented in this paper for a single thermosyphon module. The influence of different parameters such as the heat load, fluid filling ratio, air temperature differences and flow rates were investigated. A numerical model was developed in order to predict the performance of the thermosyphon unit for various and changing operating conditions. Prediction shows good agreement with the experimental results.


Articles with similar content:

THE ENERGY EFFICIENCY ANALYSIS OF DATA CENTER COOLING BASED ON SEPARATED HEAT PIPE
International Heat Transfer Conference 16, Vol.10, 2018, issue
Tao Wang, Huan Liu, Yuhua Li, Lei Zhang, Dawei Tang, Yuyan Jiang
L-Shaped Thermosyphon Loop with Vertical Evaporator for Power Electronics Cooling
International Heat Transfer Conference 15, Vol.12, 2014, issue
Thomas B. Grandinger, Francesco Agostini
CFD ANALYSIS OF A WICKLESS HEAT PIPE
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Jeevan Jaidi, Sagar Singhal, Abhishek Gaikwad
A Novel Micro Cooling System for Electronic Devices Using a Micro Capillary Groove Evaporator
Journal of Enhanced Heat Transfer, Vol.11, 2004, issue 4
Xiaohong Yan, Y. H. Zhao, Xuegong Hu, Takaharu Tsuruta
STABILITY OF TWO-PHASE FLOW IN PARALLEL PIPES WITH A COMMON FEED
ICHMT DIGITAL LIBRARY ONLINE, Vol.13, 2008, issue
Yehuda Taitel, Dvora Barnea, Ludmila Pustylnik