图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
强化传热期刊
影响因子: 0.562 5年影响因子: 0.605 SJR: 0.211 SNIP: 0.361 CiteScore™: 0.33

ISSN 打印: 1065-5131
ISSN 在线: 1026-5511

强化传热期刊

DOI: 10.1615/JEnhHeatTransf.2011002709
pages 43-52

A STUDY OF HEAT TRANSFER IN HEAT PIPE EVAPORATORS WITH METAL FIBER CAPILLARY STRUCTURES

Anatoliy G. Kostornov
I. N. Frantsevich Institute for the Problems of Materials Science, National Academy of Sciences of Ukraine, Kiev, Ukraine
Andrey A. Shapoval
I. N. Frantsevich Institute for the Problems of Materials Science, National Academy of Sciences of Ukraine, Kiev, Ukraine
M. J. Lalor
Liverpool John Moores University, General Engineering Research Institute, United Kingdom
O. Mgaloblishvili
Liverpool John Moores University, General Engineering Research Institute, United Kingdom
J.C. Legros
Universite Libre de Bruxelles, Microgravity Research Center, Av. Roosevelt 50, B-1050 Brussels, Belgium

ABSTRACT

This paper reports a detailed investigation into the influence of the structural and hydrodynamic characteristics of metal fiber capillary structures (CS) when such materials are used in the construction of heat pipe and thermosyphon evaporators. The study investigates parameters such as the heat transfer coefficient a and the critical heat flux for these materials when operating under conditions corresponding to those encountered in heat evaporators. This research has been performed using dedicated experimental equipment simulating the operating conditions of heat pipes and thermosyphons upon boiling of representative working liquids such as distilled water and acetone. A wide range of characteristics have been investigated for metal capillary structures produced from copper and stainless steel fibers: range of CS porosity Θ = 40% to 90%; range of CS thickness δ = 0.2 mm to 10.0 mm; CS skeleton thermal conductivity range λ = 01 W/(m · K) to 70.0 W/(m · K).

REFERENCES

  1. Kostornov,A.G, PermeableMetalFibrousMaterials.

  2. Kostornov, A. G. , Materials Science of Dispersed and Porous Materials and Alloys.

  3. Kutateladze, S. S. , The Heat Exchange Theory.

  4. Labuntsov, D. A. , The problems of heat exchange during nucleate boiling of liquid.

  5. Tolubinsky, V. I., Mechanism of heat exchange and the relationships for vapor formation in a heat pipe evaporation zone.

  6. Tovbin, M. V., Chalenko, V. G., and Scherbina, L. S., The role of film transfer in the water evaporation process from capillary porous solids.


Articles with similar content:

INNOVATIVE HEAT PIPES AND NANOTECHNOLOGIES
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2014, issue
Leonid L. Vasiliev, Jr., Mikhail I. Rabetskii, Leonid P. Grakovich, Leonard L. Vasiliev
An Experimental Analysis of an Open Looped Pulsating Heat Pipe Operating with a Dielectric Working Fluid for Embedded Power Electronic Applications
International Heat Transfer Conference 15, Vol.49, 2014, issue
Daniel Kearney, Justin Griffin, Omar Suleman
POLYMER FLAT LOOP THERMOSYPHONS
Heat Pipe Science and Technology, An International Journal, Vol.5, 2014, issue 1-4
Leonid L. Vasiliev, Jr., Mikhail I. Rabetskii, Leonid P. Grakovich, S. S. Pesetskii , Leonard L. Vasiliev, S. P. Bogdanovich
Experimental Investigation of the Hydrocarbons Pool Boiling on Porous Structures
International Heat Transfer Conference 12, Vol.40, 2002, issue
Leonid L. Vasiliev, Jr., A.V. Ovsianik, Leonard L. Vasiliev, Mikhail N. Novikov, Alexander S. Zhuravlyov
Boiling Heat Transfer in the Miniature Axially-Grooved Rectangular Channel with Discrete Heat Sources
Journal of Enhanced Heat Transfer, Vol.4, 1997, issue 3
Amir Faghri, Dmitry Khrustalev