每年出版 8 期
ISSN 打印: 1065-5131
ISSN 在线: 1563-5074
Indexed in
Heat Transfer Enhancement in Latent Heat Thermal Energy Storage System by Using an External Radial Finned Tube
摘要
The heat transfer enhancement in the latent heat thermal energy storage system by using an externally finned tube is presented in this paper. The melting in the phase change materials and heat conduction in the tube wall and fins are described by a temperature transforming model coupled to the heat transfer from transfer fluid. The forced convection inside the tube was solved by an analytical method. The results show that the local Nusselt number inside the tube cannot be simply given by the Graetz solution. The effects of the tube wall and initial subcooling on the heat transfer performance are also studied.
-
Liu Shuli, Li Yongcai, Zhang Yaqin, Review on Heat Transfer Mechanisms and Characteristics in Encapsulated PCMs, Heat Transfer Engineering, 36, 10, 2015. Crossref
-
Kozak Yoram, Rozenfeld Tomer, Ziskind Gennady, Close-contact melting in vertical annular enclosures with a non-isothermal base: Theoretical modeling and application to thermal storage, International Journal of Heat and Mass Transfer, 72, 2014. Crossref
-
Damronglerd Piyasak, Zhang Yuwen, Modified Temperature-Transforming Model for Convection-Controlled Melting, Journal of Thermophysics and Heat Transfer, 21, 1, 2007. Crossref
-
Rathod Manish K., Banerjee Jyotirmay, Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins, Applied Thermal Engineering, 75, 2015. Crossref
-
Damronglerd Piyasak, Zhang Yuwen, Numerical Simulation of Melting in Porous Media via a Modified Temperature-Transforming Model, Journal of Thermophysics and Heat Transfer, 24, 2, 2010. Crossref
-
Fukai Jun, Hamada Yuichi, Morozumi Yoshio, Miyatake Osamu, Effect of carbon-fiber brushes on conductive heat transfer in phase change materials, International Journal of Heat and Mass Transfer, 45, 24, 2002. Crossref
-
Faghri Amir, Zhang Yuwen, MELTING AND SOLIDIFICATION, in Transport Phenomena in Multiphase Systems, 2006. Crossref
-
Eckert E.R.G., Goldstein R.J., Ibele W.E., Simon T.W., Kuehn T.H., Strykowski P.J., Tamma K.K., Bar-Cohen A., Heberlein J.V.R., Davidson J.H., Bischof J., Kulacki F., Kortshagen U., Heat transfer — a review of 1996 literature, International Journal of Heat and Mass Transfer, 43, 8, 2000. Crossref
-
Wang Shimin, Faghri Amir, Bergman Theodore L., A comprehensive numerical model for melting with natural convection, International Journal of Heat and Mass Transfer, 53, 9-10, 2010. Crossref
-
Li Zhuo, Wu Zhi-Gen, Analysis of HTFs, PCMs and fins effects on the thermal performance of shell–tube thermal energy storage units, Solar Energy, 122, 2015. Crossref
-
Hamada Yuichi, Fukai Jun, Latent heat thermal energy storage tanks for space heating of buildings: Comparison between calculations and experiments, Energy Conversion and Management, 46, 20, 2005. Crossref
-
Fukai Jun, Hamada Yuichi, Morozumi Yoshio, Miyatake Osamu, Improvement of thermal characteristics of latent heat thermal energy storage units using carbon-fiber brushes: experiments and modeling, International Journal of Heat and Mass Transfer, 46, 23, 2003. Crossref
-
Zhang Huili, Baeyens Jan, Cáceres Gustavo, Degrève Jan, Lv Yongqin, Thermal energy storage: Recent developments and practical aspects, Progress in Energy and Combustion Science, 53, 2016. Crossref
-
Huang M.J., Eames P.C., McCormack S., Griffiths P., Hewitt N.J., Microencapsulated phase change slurries for thermal energy storage in a residential solar energy system, Renewable Energy, 36, 11, 2011. Crossref
-
Zhu Yejun, Huang Baoling, Wu Jingshen, Optimization of filler distribution for organic phase change material composites: Numerical investigation and entropy analysis, Applied Energy, 132, 2014. Crossref
-
Mosaffa A.H., Talati F., Basirat Tabrizi H., Rosen M.A., Analytical modeling of PCM solidification in a shell and tube finned thermal storage for air conditioning systems, Energy and Buildings, 49, 2012. Crossref
-
Yau Y.H., Rismanchi Behzad, A review on cool thermal storage technologies and operating strategies, Renewable and Sustainable Energy Reviews, 16, 1, 2012. Crossref
-
Zhang Yuwen, Faghri A., Heat transfer enhancement in latent heat thermal energy storage system by using the internally finned tube, International Journal of Heat and Mass Transfer, 39, 15, 1996. Crossref
-
Dutil Yvan, Rousse Daniel R., Salah Nizar Ben, Lassue Stéphane, Zalewski Laurent, A review on phase-change materials: Mathematical modeling and simulations, Renewable and Sustainable Energy Reviews, 15, 1, 2011. Crossref
-
Zhang Yuwen, Faghri Amir, Semi-analytical solution of thermal energy storage system with conjugate laminar forced convection, International Journal of Heat and Mass Transfer, 39, 4, 1996. Crossref
-
Kalaiselvam S., Parameshwaran R., Review on the Modeling and Simulation of Thermal Energy Storage Systems, in Thermal Energy Storage Technologies for Sustainability, 2014. Crossref
-
Li Q., Luo K.H., Kang Q.J., He Y.L., Chen Q., Liu Q., Lattice Boltzmann methods for multiphase flow and phase-change heat transfer, Progress in Energy and Combustion Science, 52, 2016. Crossref
-
Languri Ehsan Mohseni, Aigbotsua Clifford O., Alvarado Jorge L., Latent thermal energy storage system using phase change material in corrugated enclosures, Applied Thermal Engineering, 50, 1, 2013. Crossref
-
Chen Qicheng, Yang Mo, Zhang Yuwen, He Ya-Ling, Numerical Simulation of Melting in Porous Media via an Interfacial Tracking Model, Journal of Thermophysics and Heat Transfer, 25, 3, 2011. Crossref
-
Chaxiu Guo, Hexin Dong, Xinli Wei, Performance Enhancement of a PCM Cold Storage under Condition of Heat Flux, 2010 International Conference on Challenges in Environmental Science and Computer Engineering, 2010. Crossref
-
Kayansayan N., Ali Acar M., Ice formation around a finned-tube heat exchanger for cold thermal energy storage, International Journal of Thermal Sciences, 45, 4, 2006. Crossref
-
Chen Qicheng, Yang Mo, Zhang Yuwen, He Ya-Ling, Numerical Simulation of Melting in Porous Media via an Interfacial Tracking Model, Journal of Thermophysics and Heat Transfer, 25, 3, 2011. Crossref
-
Jegadheeswaran S., Pohekar Sanjay D., Performance enhancement in latent heat thermal storage system: A review, Renewable and Sustainable Energy Reviews, 13, 9, 2009. Crossref
-
Khan Zakir, Khan Zulfiqar, Ghafoor Abdul, A review of performance enhancement of PCM based latent heat storage system within the context of materials, thermal stability and compatibility, Energy Conversion and Management, 115, 2016. Crossref
-
Dinesh Babu M., Venkata Ramanan M., Experimental analysis of the performance of a solar flat plate water heater with and without internal fins, International Journal of Ambient Energy, 38, 6, 2017. Crossref
-
Dhaidan Nabeel S., Khodadadi J. M., Improved performance of latent heat energy storage systems utilizing high thermal conductivity fins: A review, Journal of Renewable and Sustainable Energy, 9, 3, 2017. Crossref
-
Buonomo B, Ercole D, Manca O, Nardini S, Numerical investigation on thermal behaviors of two-dimensional latent thermal energy storage with PCM and aluminum foam, Journal of Physics: Conference Series, 796, 2017. Crossref
-
Sarbu Ioan, Dorca Alexandru, Review on heat transfer analysis in thermal energy storage using latent heat storage systems and phase change materials, International Journal of Energy Research, 43, 1, 2019. Crossref
-
Al-Maghalseh Maher, Mahkamov Khamid, Methods of heat transfer intensification in PCM thermal storage systems: Review paper, Renewable and Sustainable Energy Reviews, 92, 2018. Crossref
-
Mahdi Mustafa S., Hasan Ahmed F., Mahood Hameed B., Campbell Alasdair N., Khadom Anees A., Karim Abdul Mun’em A., Sharif Adel O., Numerical study and experimental validation of the effects of orientation and configuration on melting in a latent heat thermal storage unit, Journal of Energy Storage, 23, 2019. Crossref
-
Languri Ethan Mohseni, Cunningham Glenn, Thermal Energy Storage Systems, in Advances in Sustainable Energy, 70, 2019. Crossref
-
Wang Shimin, Faghri Amir, Bergman Theodore L., Numerical Modeling of Alternate Melting and Solidification, Numerical Heat Transfer, Part B: Fundamentals, 58, 6, 2010. Crossref
-
Chen Qicheng, Zhang Yuwen, Yang Mo, An Interfacial Tracking Model for Convection-Controlled Melting Problems, Numerical Heat Transfer, Part B: Fundamentals, 59, 3, 2011. Crossref
-
Kong Ling Bing, Li Tao, Hng Huey Hoon, Boey Freddy, Zhang Tianshu, Li Sean, Waste Thermal Energy Harvesting (III): Storage with Phase Change Materials, in Waste Energy Harvesting, 24, 2014. Crossref
-
Norton Brian, Storage of Solar Heat, in Harnessing Solar Heat, 18, 2014. Crossref
-
Faghri Amir, Zhang Yuwen, Melting and Solidification, in Fundamentals of Multiphase Heat Transfer and Flow, 2020. Crossref
-
Mabrouk R., Dhahri H., Naji H., Hammouda S., Younsi Z., Lattice Boltzmann simulation of forced convection melting of a composite phase change material with heat dissipation through an open-ended channel, International Journal of Heat and Mass Transfer, 153, 2020. Crossref
-
Hasan Tonny Tabassum Mainul, Begum Latifa, Thermal Energy Storage Through Melting of a Commercial Phase Change Material in an Annulus with Radially Divergent Longitudinal Fins, International Journal of Thermofluid Science and Technology, 7, 1, 2020. Crossref
-
Soni Manoj Kumar, Tamar Nisha, Bhattacharyya Suvanjan, Numerical simulation and parametric analysis of latent heat thermal energy storage system, Journal of Thermal Analysis and Calorimetry, 141, 6, 2020. Crossref
-
Raul Appasaheb, Saha Sandip K., Jain Mohit, Transient performance analysis of concentrating solar thermal power plant with finned latent heat thermal energy storage, Renewable Energy, 145, 2020. Crossref
-
Andreozzi Assunta, Buonomo Bernardo, Ercole Davide, Manca Oronzio, Solar energy latent thermal storage by phase change materials (PCMs) in a honeycomb system, Thermal Science and Engineering Progress, 6, 2018. Crossref
-
Buonomo Bernardo, Ercole Davide, Manca Oronzio, Nardini Sergio, Numerical study on latent thermal energy storages with PCM partially filled with aluminium foam, Journal of Physics: Conference Series, 1224, 1, 2019. Crossref
-
Sarbu Ioan, Thermal Energy Storage, in Advances in Building Services Engineering, 2021. Crossref
-
Yang Xiaohu, Guo Junfei, Yang Bo, Cheng Haonan, Wei Pan, He Ya-Ling, Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit, Applied Energy, 279, 2020. Crossref
-
Mansour M Khamis, Effect of natural convection on conjugate heat transfer characteristics in liquid minichannel during phase change material melting, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228, 3, 2014. Crossref
-
惠 梦阁, Design of Multi-Tube Phase Change Heat Accumulators Based on Organic Rankine Cycle Systems, Modeling and Simulation, 11, 03, 2022. Crossref
-
Ma Zhanhua, Zhang Yuwen, Solid velocity correction schemes for a temperature transforming model for convection phase change, International Journal of Numerical Methods for Heat & Fluid Flow, 16, 2, 2006. Crossref
-
Damronglerd Piyasak, Zhang Yuwen, Yang Mo, Numerical simulation of solidification of liquid copper saturated in porous structures fabricated by sintered steel particles, International Journal of Numerical Methods for Heat & Fluid Flow, 22, 1, 2012. Crossref
-
Saleem Umair, Aziz Muhammad Shahzad, Waqas Adeel, Hanif Muhammad Adnan, Heat Energy Transfer Using Butyl Stearate as Phase Change Material for Free-Cooling Applications, Journal of Energy Engineering, 144, 4, 2018. Crossref