图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
流动显示和图像处理期刊
SJR: 0.11 SNIP: 0.312 CiteScore™: 0.1

ISSN 打印: 1065-3090
ISSN 在线: 1940-4336

流动显示和图像处理期刊

DOI: 10.1615/JFlowVisImageProc.2013006729
pages 195-213

FLOW ANALYSIS OF A RADIAL-INFLOW VARIABLE GEOMETRY TURBINE STATOR VANE RING USING PARTICLE IMAGE VELOCIMETRY

Lex L. de Rijk
Engineering Thermodynamics for Energy Systems, Department of Mechanical Engineering, Eindhoven University of Technology, Den Dolech 2, 5612AZ Eindhoven, The Netherlands
R. H. L. Eichhorn
Engineering Thermodynamics for Energy Systems, Department of Mechanical Engineering, Eindhoven University of Technology, Den Dolech 2, 5612AZ Eindhoven, The Netherlands
Michael D. Boot
Combustion Technology Group, Department of Mechanical Engineering, Eindhoven University of Technology, Den Dolech 2, 5612AZ Eindhoven, The Netherlands
David M. J. Smeulders
Engineering Thermodynamics for Energy Systems, Department of Mechanical Engineering, Eindhoven University of Technology, Den Dolech 2, 5612AZ Eindhoven, The Netherlands

ABSTRACT

An optimization at the lower off-design mass-flow range of the radial-inflow variable geometry turbine is required for future turbine applications. One of these applications is using this type of turbine as the throttling apparatus for a spark ignition engine to recover energy which is wasted by the conventional throttle. A wide operating mass-flow range with significant turbine efficiency is needed for these applications. The stator-to-rotor interaction is optimized of a standard radial-inflow turbine by changing the variable-vane-angle stator vane ring geometry. The flow at the conventional and a new design stator vane ring is analyzed using particle image velocimetry (PIV) with the intention of using the results to substantiate the increase of performance of the new turbine with new designed stator vane ring and for the admittance of computational fluid dynamic simulations. A PIV experimental setup is built to visualize the jet flow between and directly downstream the stator vanes. Two-dimensional steady-state jet-flow characteristics are mapped at several stator vane positions. Two series of fixed positioned stator vane rings are fabricated by rapid prototyping which represent the original and new variable-vane-angle stators. The flow characteristics of both series of vane rings are compared.

REFERENCES

  1. Eichhorn, R., Boot, M., and Luijten, C. , Waste energy driven air conditioning system (WEDACS).

  2. Eichhorn, R., Boot, M., and Luijten, C. , Throttle loss recovery using a variable geometry turbine.

  3. Hiett, G. and Johnston, I. , Experiments concerning the aerodynamic performance of inward flow radial turbines.

  4. Kessel, J., Schaffnit, J., and Smidt, M. , Modelling and real-time simulation of a turbocharger with variable turbine geometry (vtg).

  5. Raffel, M.,Willert, C.,Wereley, S., and Kompenhans, J. , Particle Image Velocimetry - A Practical Guide.

  6. Watson, N. and Janota, M. , Turbocharging the Internal Combustion Engine.


Articles with similar content:

IMAGING SUPERSONIC AIRCRAFT SHOCK WAVES
Journal of Flow Visualization and Image Processing, Vol.4, 1997, issue 3
Gerald J. Vieira, Albion H. Bowers, Kathryn Stacy, Edward A. Haering, Jr., Leonard M. Weinstein
A COMPARATIVE STUDY OF THE FILM COOLING HOLE CONFIGURATION EFFECTS ON THE LEADING EDGE OF ASYMMETRICAL TURBINE BLADE
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2009, issue
Abbes Azzi, B. A. Jubran, Mustapha Benabed
UNSTEADY CHARACTERISTICS OF TIP-LEAKAGE FLOW IN AN AXIAL FLOW FAN
TSFP DIGITAL LIBRARY ONLINE, Vol.10, 2017, issue
Haecheon Choi, Keuntae Park, Oh-kyoung Kwon, Seokho Choi, Yongcheol Sa
Effects of Surface Geometry and Blowing Ratio on Film Cooling Performance at Airfoil Trailing Edge Investigated by Using Large Eddy Simulation
International Heat Transfer Conference 15, Vol.20, 2014, issue
Akira Murata, Kaoru Iwamoto, Ena Mori
SIMULATION OF SUPERSONIC INJECTION OF AERATED LIQUID JET
Second Thermal and Fluids Engineering Conference, Vol.46, 2017, issue
Abhijit S. Choudhari, Khaled A. Sallam