高温材料处理：国际期刊
每年出版 4 期
ISSN 打印: 1093-3611
ISSN 在线: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
卷 24, 2020 册 1
DOI: 10.1615/HighTempMatProc.v24.i1
PREPARATION OF A Fe3O4-BONDED MAGNETIC COMPOSITE BY THE HYDROTHERMAL METHOD
pp. 1-8
DOI: 10.1615/HighTempMatProc.2020032847
ZrO2/ZrN MULTILAYERS ON BARE SINTERED NdFeB MAGNETS BY ION-PLASMA DEPOSITION WITH PULSED BIASING
pp. 9-20
DOI: 10.1615/HighTempMatProc.2020033231
EFFECT OF IMPREGNATION BY SILVER NANOPARTICLES ON THE EFFICIENCY OF PLASMA-TREATED ZnO-BASED PHOTOCATALYSTS
pp. 21-45
DOI: 10.1615/HighTempMatProc.2020033434
SIMULATION OF PARAMETERS OF EXCILAMPS EXCITED BY GLOW DISCHARGE
pp. 47-59
DOI: 10.1615/HighTempMatProc.2020033164
INFLUENCE OF ENERGY ON THE PHASE COMPOSITION OF THE ULTRA-DISPERSED PRODUCT OF THE MOLYBDENUM-CARBON SYSTEM OBTAINED BY THE VACUUMLESS ARC DISCHARGE METHOD
pp. 61-64
DOI: 10.1615/HighTempMatProc.2020033600
TWO-DIMENSIONAL MODEL OF HIGH-TEMPERATURE SYNTHESIS OF AN INTERMETALLIC IN THE REGIME OF DYNAMIC THERMAL EXPLOSION
pp. 65-79
DOI: 10.1615/HighTempMatProc.2020033859
EFFECT OF MULTILAYER PROTECTIVE COATING ON THE THERMAL FIELD DYNAMICS IN THE CUTTING TOOL DURING MACHINING
pp. 81-90
DOI: 10.1615/HighTempMatProc.2020033202
最新一期
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
ELECTRON-BEAM SYNTHESIS OF ZIRCONIA CERAMIC COATINGS IN THE FOREVACUUM PRESSURE RANGE
INCREASING THE WEAR RESISTANCE OF TITANIUM ALLOYS BY DEPOSITION OF A MODIFYING COATING (Zr,Nb)N
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
将发表的论文
Application of a non-self-sustained glow discharge initiated by a focused electron beam in the forevacuum pressure region for nitriding the inner surface of narrow metal tubes
PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products