图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
高温材料处理:国际期刊
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN 打印: 1093-3611
ISSN 在线: 1940-4360

高温材料处理:国际期刊

DOI: 10.1615/HighTempMatProc.v10.i3.20
pages 365-378

PREPARATION OF INSULATING REFRACTORY MATERIALS BY PLASMA SPRAY TECHNOLOGY

Vitas Valincius
Lithuanian Energy Institute, Plasma Processing Laboratory, Breslaujos 3, 44403 Kaunas, Lithuania
Vilma Snapkauskiene
Lithuanian Energy Institute, Plazminiø technologijø sektorius, Breslaujos str. 3, LT-44403 Kaunas, Lithuania
Romualdas Kerzelis
Lithuanian Energy institute, Material testing and research laboratory, Breslaujos 3, 44403 Kaunas, Lithuania
Viktorija Valinciute
Lithuanian Energy institute, Material testing and research laboratory, Breslaujos 3, 44403 Kaunas, Lithuania
Vladas Mecius
Lithuanian Energy institute, Material testing and research laboratory, Breslaujos 3, 44403 Kaunas, Lithuania

ABSTRACT

The study covers results of production of high thermal resistant granules, fibres and ceramic coatings by plasma spray technology. Aluminium hydroxide, pure kaolin and their mixtures with 20, 50 and 80% quartz sand, yttria partially (10wt%) stabilized zirconia and titanium dioxide were injected into air plasma jet generated by DC linear plasma torch. Hard ceramic granules and fibres were produced in the plasmachemical reactor, which is directly connected with a plasma torch. The coatings were deposited on polished titanium alloy and stainless steel sheets.
Determination of microstructure, elemental and phase composition of the resulting products was carried out using scanning electron microscopy and X-ray diffraction analysis, respectively along with studies of mechanical properties of the material. As the data of this study show, the use of plasma spraying technology has significant consequence in the formation of high thermal resistant refractory products which represent a new approach in the domain of mineral fibre and granules preparation.


Articles with similar content:

PULSED PLASMA DEPOSITION OF OXIDE HARD COATINGS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.14, 2010, issue 4
R. Cremer, Dieter Neuschutz, K. Reichert, G. Erkens
MECHANISMS OF LOW-TEMPERATURE DIFFUSION SATURATION OF STRUCTURAL STEEL WITH NITROGEN IN THE PLASMA OF A LOW-PRESSURE ARC DISCHARGE
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.17, 2013, issue 4
P. M. Schanin, Yu. A. Kolubaeva, Yang Si-Ze, Nikolay N. Koval, Yurii F. Ivanov, I. M. Goncharenko, S. V. Grigoriev
PULSED PLASMA DEPOSITION OF OXIDE HARD COATINGS
Progress in Plasma Processing of Materials, 2003, Vol.0, 2003, issue
Dieter Neuschutz, R. Cremer, K. Reichert, G. Erkens
PULSED PLASMA DEPOSITION OF OXIDE HARD COATINGS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.6, 2002, issue 4
R. Cremer, Dieter Neuschutz, K. Reichert, G. Erkens
PLASMA PROCESS FOR THE VITRIFICATION OF INCINERATION FLYASH
Progress in Plasma Processing of Materials, 1999, Vol.1, 1999, issue
Jacques Amouroux, F. Genet, Daniel Morvan, M.F. Renou-Gonnord, K. Coulibaly