图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
高温材料处理:国际期刊
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN 打印: 1093-3611
ISSN 在线: 1940-4360

高温材料处理:国际期刊

DOI: 10.1615/HighTempMatProc.2015015731
pages 77-84

WIDE-APERTURE ELECTRON SOURCE WITH A PLASMA GRID EMITTER

T. V. Koval
National Research Tomsk Polytechnic University, 30 Lenin Ave., Tomsk, 634050, Russia
M. S. Vorobyov
Institute of High Current Electronics, Siberian Branch of the Russian Academy of Sciences, 2/3 Akademichesky Ave., Tomsk, 634055, Russia
Bao Hung Nguyen
National Research Tomsk Polytechnic University, 30 Lenin Ave., Tomsk, 634050, Russia

ABSTRACT

This paper presents a theoretical and experimental investigation of the formation and transport of a large cross-section beam in a low-pressure gas, the discharge plasma characteristics in an electron source with a plasma emitter and beam extraction into the atmosphere through a thin foil. In such a source, the electron beam is a superposition of elementary beams formed by separate emission structures, the plasma boundary of which is stabilized by a fine metal grid. In experiments at an accelerating voltage of 200 kV, emission current of 16 A, and pulse duration of 40 μs, about 4 kW of the beam average power is extracted from the accelerating gap into the atmosphere at the geometric transparency of a supporting grid of the exit foil window equal to 56%. Numerical investigation of the discharge plasma generation, formation and transport of an electron beam also is carried out. It is shown that the characteristics of the discharge plasma depend on the resistance in the hollow anode circuit of the discharge system and on the mask surface area. The main beam current losses are associated with the expansion of the elementary electron beams cross section in the accelerating gap, plasma flowing-in behind the mask, ion current, and losses on the foil.


Articles with similar content:

SPECTROSCOPIC AND PROBE DIAGNOSTICS OF CARBON PLASMA FLOWS OF A PULSE VACUUM ARC
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.14, 2010, issue 1-2
S.V. Goncharik, V. V. Azharonok, L. E. Krat'ko, N. M. Chekan, N. I. Chubrik, I. P. Smyaglikov
ION CLEANING AND NITRIDING USING A HIGH APERTURE HALL CURRENT ACCELERATOR
Progress in Plasma Processing of Materials, 2001, Vol.0, 2001, issue
M. Friesel , N .F. Vershinin, S. A. Polyakov, B. B. Straumal, P. V. Orlova, W. Gust
MODELING OF EMISSION CHARACTERISTICS OF XeCl EXCILAMPS IN PULSE-PERIODIC MODE OF OPERATION
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.18, 2014, issue 3
Kazimir Znosko, Slavomir Anufrick, Alexander Volodenkov
SYNTHESIS AND PROPERTIES OF FULLERENE CONTAINED FILMS IN RF PLASMA
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.9, 2005, issue 2
V. V. Azharonok, V. D. Shimanovich, L. I. Filatova
EQUIPMENT FOR PULSED THERMAL TREATMENT OF THE SURFACES OF MATERIALS BY A LOW-ENERGY ELECTRON BEAM
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.17, 2013, issue 2-3
A. D. Teresov, Vladimir N. Devyatkov, Nikolay N. Koval, S. V. Grigoriev