图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
高温材料处理:国际期刊
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN 打印: 1093-3611
ISSN 在线: 1940-4360

高温材料处理:国际期刊

DOI: 10.1615/HighTempMatProc.v14.i4.90
pages 389-399

PLASMA SPRAYED COATINGS OF MECHANOFUSED ALUMINA-STEEL PARTICLES

Helene Ageorges
University of Angers, LETP, 2 Boulevard Lavoisier, 49045 Angers Cedex, France
Alain Grimaud
L.E.T.P., Faculté des Sciences, 2 Bd Lavoisier 49045 Angers Cedex, France
Pierre Fauchais
Laboratoire Sciences des Procedes Ceramiques et de Traitements de Surface UMR CNRS 6638 University of Limoges 123 avenue Albert Thomas, 87060 LIMOGES - France

ABSTRACT

Steel particles (Fe + 19 wt% Cr and 11 wt% Ni) with a size distribution in the range between 50 and 100 μm were coated with pure α-alumina (99.99%) particles whose mean size was 0.6 μm using a mechanofusion process. It was possible to obtain particles with alumina shells with a mean thickness of 2−4 μm. EDS analysis showed that, according to the detection limit, no alumina was imbedded in the steel core and reciprocally no steel was included in the alumina shell. The composite powder was then plasma sprayed using a PTF4 type plasma gun (nozzle internal diameter 7 mm) with the internal injection of the powder 3 mm upstream of the nozzle exit. The arc current was 500 A and plasma forming gas mixture was 53 slm Ar and 7 slm H2. The coatings were sprayed on cast iron samples (diameter: 25 mm, thickness: 5 mm) located on a rotating substrate holder (110 mm diameter). The plasma torch was moved parallel to the holder axis. The substrates were preheated with the plasma gun and their surface temperature was controlled by air jets monitored by an IR monochromatic pyrometer. The coatings showed a uniform distribution of alumina in the steel matrix for two substrate preheating temperatures of 300 and 550° C.


Articles with similar content:

PLASMA SPRAYED COATINGS OF MECHANOFUSED ALUMINA-STEEL PARTICLES
Progress in Plasma Processing of Materials, 1999, Vol.1, 1999, issue
Helene Ageorges, Alain Grimaud, Pierre Fauchais
OXIDATION AT DIFFERENT STAGES IN STAINLESS STEEL COATINGS DEVELOPED BY AIR PLASMA SPRAYING ON PLAIN CARBON STEEL
Progress in Plasma Processing of Materials, 2003, Vol.0, 2003, issue
J. C. Labbe, B. Hannoyer, A. A. Syed, Alain Denoirjean, Pierre Fauchais, P. Denoirjean
PREPARATION OF INSULATING REFRACTORY MATERIALS BY PLASMA SPRAY TECHNOLOGY
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.10, 2006, issue 3
Vitas Valincius, Vilma Snapkauskiene, Viktorija Valinciute, Vladas Mecius, Romualdas Kerzelis
Morphology of Titanium Diboride Obtained by Electrochemical Synthesis from Molten Chloro-Fluoride Melt
Advances in Molten Salts, Vol.0, 1998, issue
J.l. Sytchev, G Kaptay, B Tury
EXPERIMENTAL INVESTIGATION OF STRUCTURE, WEAR, AND EROSION RESISTANCE OF SS316 SUBSTRATE COATED WITH TiC–Al2O3 COMPOSITE BY LASER CLADDING
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.22, 2018, issue 1
Elango Natarajan, R. Prabu, S. Ramesh