高温材料处理:国际期刊
每年出版 4 期
ISSN 打印: 1093-3611
ISSN 在线: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
EFFECTS OF PLASMA PARAMETERS ON THE PROPERTIES OF La1-xSrxMnO3 THIN LAYERS DEPOSITED IN LOW-PRESSURE RF PLASMA WAVE SHOCK REACTOR
卷 7,
册 2, 2003,
6 pages
DOI: 10.1615/HighTempMatProc.v7.i2.120
摘要
Deposits of La1-xSrxMnO3 ± d used as cathode materials in solid oxide fuel cells are obtained by oxidation of nitrate precursors in a low pressure RF plasma reactor equipped with a convergent nozzle. Impedance measurements showed the role of plasma parameters on the electrical conductivity of deposits. Infrared analysis of deposits permitted to measure the role of plasma parameters on the conversion rate of nitrate precursors. Oxygen and hydroxyl radicals produced by plasma are found to be the major reactive species that lead to the oxidation of nitrate precursors in this process.
1133 文章浏览量
5 文章下载
统计数据
相似内容的文章:
最新一期
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
将发表的论文
PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Increasing the wear resistance of titanium alloys by deposition of a modifying coating (Zr,Nb)N
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products