图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
高温材料处理:国际期刊
SJR: 0.19 SNIP: 0.341 CiteScore™: 0.43

ISSN 打印: 1093-3611
ISSN 在线: 1940-4360

高温材料处理:国际期刊

DOI: 10.1615/HighTempMatProc.2015013120
pages 37-45

AUTOGENOUS GAS TUNGSTEN ARC WELDABILITY OF FORGED TI−45AL−8.5NB−02W−02B−0.02Y ALLOY

Xiangun Xu
Materials and Chemistry School, Zhongyuan University of Technology, Zhengzhou 450007, China
Lin Song
State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China
Junpin Lin
State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China

ABSTRACT

The weldability of a forged Ti−45Al−8.5Nb−0.2W−0.2B−0.02Y alloy was investigated using the autogenous gas tungsten arc welding process. The results show that sound welds can be achieved for butt-joint welding of a 2.5-mm-thick sheet at a welding current of 80 A without preheating or post-welding heat treatment. Microstructure analyses show that the forged alloy exhibits an equiaxed duplex microstructure, with an average grain size of 8.5 µm, containing a 51% γ phase, 6.5% β(B2) phase, and short boride ribbons. After welding, the microstructure exhibited 300−500-µm-thick columnar dendritic structures near the fusion boundary and equiaxed dendritic structures in the majority of the weld bead. The dendritic crystals are composed of fine lamellar colonies as the major constituent and γ and β(B2) phases as the minor constituent. Long curvy borides exist in the interdendritic zones. The Vickers hardness of the fusion zone is 560−582 HV, which is higher than that of the base alloy (378 HV). This is attributed to the high volume fraction of the α2 phase in the weld. The appearance and the microstructure of the weld show that the forged Ti−45Al−8.5Nb−0.2W−0.2B−0.02Y alloy has good weldability.


Articles with similar content:

COMBINED MODIFICATION OF ALUMINUM BY ELECTRON-ION-PLASMA METHODS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.18, 2014, issue 4
A. D. Teresov, E. A. Petrikova, I. A. Ikonnikova, O. V. Ivanova, V. V. Shugurov, Yurii F. Ivanov, Olga V. Krysina, M. Rygina
SPRAY SYNTHESIS OF SUPERPLASTIC MATERIALS FOR NEAR-NET-SHAPE MANUFACTURING
Atomization and Sprays, Vol.7, 1997, issue 1
Enrique J. Lavernia, Yue Wu
RECRYSTALLIZATION PROCESSES IN AUSTENITIC ALLOY PRODUCED BY SELECTIVE LASER MELTING
Nanoscience and Technology: An International Journal, Vol.5, 2014, issue 4
E. V. Tsvetkova, K. O. Bazaleeva, E. V. Balakirev
ANALYSIS OF THE PHYSICAL PROPERTIES AND COMPRESSIBILITY OF ZINC OXIDE (ZnO) NANOPARTICLES AS AN ALTERNATIVE INNOVATION OF THE DENTAL AMALGAM MATERIAL
Nanoscience and Technology: An International Journal, Vol.4, 2013, issue 3
Poppy Puspitasari
DUAL APPLICATION OF DIVALENT ION-ANCHORED CATALYST: BIODIESEL SYNTHESIS AND PHOTOCATALYTIC DEGRADATION OF CARBAMAZEPINE
Catalysis in Green Chemistry and Engineering, Vol.2, 2019, issue 1
Mika Sillanpää, Indu Ambat, Sidra Iftekhar, Esa Haapaniemi, Varsha Srivastava