ISSN 打印: 1543-1649
ISSN 在线: 1940-4352

# 国际多尺度计算工程期刊

DOI: 10.1615/IntJMultCompEng.2019028827
pages 281-295

## HYBRID MORI-TANAKA/FINITE ELEMENT METHOD IN HOMOGENIZATION OF COMPOSITE MATERIALS WITH VARIOUS REINFORCEMENT SHAPE AND ORIENTATION

Witold Ogierman
Institute of Computational and Mechanical Engineering, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland

### ABSTRACT

This paper is devoted to application of hybrid Mori-Tanaka/finite element method for modeling of composite materials reinforced with inclusions of arbitrary shape and random orientation. The paper discusses numerical procedures connected with the hybrid homogenization both for linear and nonlinear composites. Homogenization in nonlinear regime is performed by coupling the Mori-Tanaka model with the finite element solution of the equivalent inclusion problem through an iterative procedure. Moreover, the paper introduces a novel approach of modified equivalent inclusion problem that allows one to analyze composites with misaligned inclusions. Composites containing an elastic-plastic matrix reinforced with linear-elastic spherical and cubic particles have been analyzed. Results obtained by using the hybrid homogenization method are compared to the pure numerical solution achieved by the finite element homogenization based on the representative volume element containing a substantial number of inclusions. In general, good agreement between results obtained by using the hybrid and the pure numerical homogenization has been noted.

### REFERENCES

1. Advani, S.G. and Tucker III, C.L., The Use of Tensors to Describe and Predict Fiber Orientation in Short Fibre Composites, J. Rheol, vol. 31, pp. 751-784,1987.

2. Ambrozinski, M., Bzowski, K., Rauch, L., and Pietrzyk, M., Application of Statistically Similar Representative Volume Element in Numerical Simulations of Crash Box Stamping, Arch. Civ. Mech. Eng., vol. 12, pp. 126-132,2012.

3. Beluch, W. and Dlugosz, A., Multiobjective and Multiscale Optimization of Composite Materials by Means of Evolutionary Computations, J. Theor. Appl. Mech., vol. 54, pp. 397-409,2016.

4. Benveniste, Y., A New Approach to the Application of Mori-Tanaka's Theory in Composite Materials, Mech. Mater., vol. 6, pp. 147-157,1987.

5. Bornert,M., Stolz, C., and Zaoui, A., Morphologically Representative Pattern-Based Bounding in Elasticity, J. Mech. Phys. Solids., vol. 44, no. 3, pp. 307-330,1996.

6. Bradshaw, R.D., Fisher, F.T., and Brinson, L.C., Fiber Waviness in Nanotube-Reinforced Polymer Composites-II: Modeling via Numerical Approximation of the Dilute Strain Concentration Tensor, Compos. Sci. Technol., vol. 63, pp. 1705-1722,2003.

7. Brassart, L., Doghri, I., andDelannay, L., Homogenization of Elasto-Plastic Composites Coupled with a Nonlinear Finite Element Analysis of the Equivalent Inclusion Problem, Int. J. Solids Struct., vol. 47, pp. 716-729,2010.

8. Burczynski, T., Kus, W., and Brodacka, A., Multiscale Modeling of Osseous Tissues, J. Theor. Appl. Mech., vol. 48, pp. 855-870, 2010.

9. Doghri, I. and Ouaar, A., Homogenization of Two-Phase Elasto-Plastic Composite Materials and Structures Study of Tangent Operators, Cyclic Plasticity and Numerical Algorithms, Int. J. Solids Struct., vol. 40, pp. 1681-1712,2003.

10. Doghri, I. and Tinel, L., Micromechanics of Inelastic Composites with Misaligned Inclusions: Numerical Treatment of Orientation, Comput. Methods Appl. Mech. Eng., vol. 195, pp. 1387-1406,2006.

11. Doghri, I. and Tinel, L., Micromechanical Modeling and Computation of Elasto-Plastic Materials Reinforced with Distributed-OrientationFibers, Int. J. Plasticity, vol. 21, pp. 1919-1940,2005.

12. Eshelby, J.D., The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proc. R. Soc. London Ser. A, vol. 241, pp. 376-396,1957.

13. Friebel, C., Doghri, I., and Legat, V., General Mean-Field Homogenization Schemes for Viscoelastic Composites Containing Multiple Phases of Coated Inclusions, Int. J. Solids Struct., vol. 43, pp. 2513-2541,2006.

14. Kaminski, M., Boundary Element Method Homogenization of the Periodic Linear Elastic Fiber Composites, Eng. Anal. Boundary Elem, vol. 23, pp. 815-823,1999.

15. Kanit, T., Forest, S., Galliet, I., Mounoury, V., and Jeulin, D., Determination of the Size of the Representative Volume Element for Random Composites: Statistical and Numerical Approach, Int. J. Solids Struct. vol. 40, pp. 3647-3679,2003.

16. Klusemann, B., Bohm, H.J., and Svendsen, B., Homogenization Methods for Multi-Phase Elastic Composites with Non-Elliptical Reinforcements: Comparisons and Benchmarks, Eur. J. Mech. A/Solids, vol. 34, pp. 21-37,2012.

17. Kouznetsova, V., Brekelmans, W.A.M., and Baaijens, F.P.T., Approach to Micro-Macro Modeling of Heterogeneous Materials, Comput. Mech, vol. 27, pp. 37-48,2001.

18. Kus, W. and Burczynski, T., Bioinspired Algorithms in Multiscale Optimization, in Computer Methods in Mechanics: Advanced Structured Materials, M. Kuczma and K. Wilmanski, Eds., Berlin: Springer, pp. 183-192,2010.

19. Li, Y., Chen, W., Jin, X., and Xu, H., 3D Representative Volume Element Reconstruction of Fiber Composites via Orientation Tensor and Substructure Features, 31st Annual Tech. Conf. Am. Soc. Compos., ASC 2016, Williamsburg, VA, 2016.

20. Majewski, M., Kursa, M., Holobut, P., and Kowalczyk-Gajewska, K., Micromechanical and Numerical Analysis of Packing and Size Effects in Elastic Particulate Composites, Composites B, vol. 124, pp. 158-174,2017.

21. Mura, T., Micromechanics of Defects in Solids, Dordrecht, the Netherlands: Martinus Nijhoff Publishers, 1987.

22. Nemat-Nasser, S. and Hori, M., Micromechanics: Overall Properties of Heterogeneous Materials, Amsterdam, the Netherlands: Elsevier Science Publishers, 1999.

23. Ogierman, W., Hybrid Mori-Tanaka/Finite Element Method: An Efficient Homogenization of Composite Materials with Various Reinforcement Shape and Orientation, 13th World Congress on Computational Mechanics (WCCM XIII) and 2nd Pan American Congress on Computational Mechanics, New York, 2018.

24. Ogierman, W. and Kokot, G., Generation of Representative Volume Elements of Heterogeneous Materials with Distributed Orientations of Inclusions, Compos. Struct., vol. 201, pp. 636-646,2018.

25. Ogierman, W. and Kokot, G., Homogenization of Inelastic Composites with Misaligned Inclusions by Using the Optimal Pseudo-Grain Discretization, Int. J. Solids Struct., vols. 230-240, pp. 113-114,2017.

26. Ogierman, W. and Kokot, G., A Study on Fiber Orientation Influence on the Mechanical Response of a Short Fiber Composite Structure, Acta Mech., vol. 227, pp. 173-183,2016.

27. Pettermann, H.E., Huber, C.O., Luxner, M.H., Nogales, S., and Bohm, H.J., An Incremental Mori-Tanaka Homogenization Scheme for Finite: Strain Thermoelastoplasticity of MMCs, Materials, vol. 3, pp. 434-451,2010.

28. Pierard, O., Gonzalez, C., Segurado, J., Llorca, J., and Doghri, I., Micromechanics of Elasto-Plastic Materials Reinforced with Ellipsoidal Inclusions, Int. J. Solids Struct., vol. 44, pp. 6945-6962,2007.

29. Ptaszny, J., Accuracy of the Fast Multipole Boundary Element Method with Quadratic Elements in the Analysis of 3D Porous Structures, Comput. Mech., vol. 56, pp. 477-490,2015.

30. Ptaszny, J., Dziatkiewicz, G., and Fedelinski, P., Boundary Element Method Modelling of Nanocomposites, J. Multiscale Comput. Eng., vol. 12, pp. 33-43,2014.

31. Sadowski, P., Kowalczyk-Gajewska, K., and Stupkiewicz, S., Consistent Treatment and Automation of the Incremental Mori-Tanaka Scheme for Elasto-Plastic Composites, Comput. Mech., vol. 60, pp. 1-19,2017.

32. Scheunemann, L., Balzani, D., Brands, D., and Schroder, J., Design of 3D Statistically Similar Representative Volume Elements based on Minkowski Functionals, Mech. Mater., vol. 90, pp. 185-201,2015.

33. Schjedt-Thomsen, J. and Pyrz, R., The Mori-Tanaka Stiffness Tensor: Diagonal Symmetry, Complex Fiber Orientations and Non-Dilute Volume Fractions, Mech. Mater., vol. 33, pp. 531-544,2001.

34. Segurado, J. and Llorca, J., A Numerical Approximation to the Elastic Properties of Sphere-Reinforced Composites, J. Mech. Phys. Solids, vol. 50, pp. 2107-2121,2002.

35. Srinivasulu, G., Velmurugan, R., and Jayasankar, S., A Hybrid Method for Computing the Effective Properties of Composites Containing Arbitrarily Shaped Inclusions, Comput. Struct., vol. 150, pp. 63-70,2015.

36. Tucker, I.C. and Liang, E., Stiffness Predictions for Unidirectional Short-Fibre Composites: Review and Evaluation, Compos. Sci. Technol., vol. 59, pp. 655-671,1999.

37. Zheng, Y. and Fish, J., Toward Realization of Computational Homogenization in Practice, Int. J. Numer. Methods Eng., vol. 73, pp. 361-380,2008.

### Articles with similar content:

The Generalized Fuzzy Critical Path Method: Analysis, Synthesis, Experiments
Journal of Automation and Information Sciences, Vol.33, 2001, issue 5-8
Tatyana A. Tyshchuk, Anatoliy I. Sleptsov
Green's Function and Eshelby's Fields in Couple-Stress Elasticity
International Journal for Multiscale Computational Engineering, Vol.2, 2004, issue 1
Quanshui Zheng, Z.-H. Zhao
BOUNDARY ELEMENT METHOD MODELLING OF NANOCOMPOSITES
International Journal for Multiscale Computational Engineering, Vol.12, 2014, issue 1
Piotr Fedelinski, Jacek Ptaszny, Grzegorz Dziatkiewicz
COMPUTATIONAL CONTINUA FOR THICK ELASTIC LAYERED STRUCTURES
International Journal for Multiscale Computational Engineering, Vol.14, 2016, issue 5
Vasilina Filonova, Jacob Fish
MODELING THE HYGRO-THERMO-MECHANICAL AGGLOMERATION RELATIONS OF CARBON-EPOXY HYBRID NANOCOMPOSITES
International Journal for Multiscale Computational Engineering, Vol.13, 2015, issue 3
Somaraddi R. Basavaraddi, Sharanabasava C. Pilli, Vilas V. Karjinni, Chetan S. Jarali, S. Raja