图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.v14.i6.40
18 pages

ANALYSIS OF SIZE-CLASSIFIED SPRAY STRUCTURE AND ATOMIZATION MECHANISM FOR A GASOLINE DIRECT INJECTOR

Chang Hee Lee
Department of Mechanical Engineering, Hanyang University, Ansan, South Korea
Chang Sik Lee
School of Mechanical Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 133-791, Republic of Korea

ABSTRACT

In gasoline direct-injection (GDI) engines, atomized spray is desired to achieve efficient mixture formation needed for good engine performance because the injection process leaves little time for the evaporation of fuels. Therefore, a substantial' understanding of global spray structure and quantitative characteristics of sprays are decisive technology to optimize combustion systems of GDI engines.
In this study, the spray characteristics and atomization mechanism of the high-pressure swirl-type GDI injector were analyzed using a phase Doppler anemometer (PDA) system, and the different breakup mechanisms controlling the droplets with various sizes were investigated. In addition, the measured droplet size data were compared with Nukiyama-Tanasawa and Rosin-Rammler distribution functions. From experimental results, the detailed spray structure and factors influencing the atomization mechanism of fuel droplets were investigated with the classification of droplet size. The results also revealed that the Nukiyama-Tanasawa distribution function was found to overestimate the population of small drops and Rosin-Rammler function overestimated the population of large drops.


Articles with similar content:

INFLUENCE OF ATOMIZATION AND SPRAY PARAMETERS ON THE FLAME SPRAY PROCESS FOR NANOPARTICLE PRODUCTION
Atomization and Sprays, Vol.24, 2014, issue 6
C. D. Rosebrock, Udo Fritsching, L. Madler, Dirceu Noriler, H. F. Meier
ATOMIZATION CHARACTERISTICS OF FUEL INJECTED THROUGH THE INJECTOR OF A SI ENGINE WITH A DIRECT INJECTION SYSTEM
Atomization and Sprays, Vol.13, 2003, issue 5&6
Chang Sik Lee, Sungwook Park
CHARACTERIZATION OF INITIAL SPRAY FROM A D.I. GASOLINE INJECTOR BY HOLOGRAPHY AND LASER DIFFRACTION METHOD
Atomization and Sprays, Vol.14, 2004, issue 5
Keiya Nishida, Hiroyuki Hiroyasu, Tie Li
TWO-PHASE FLOW CALCULATION OF REACTING AND NONREACTING, NONSWIRUNG, AIR-ASSISTED METHANOL SPRAYS
Atomization and Sprays, Vol.4, 1994, issue 3
Anil Tolpadi
ATOMIZATION CHARACTERISTICS OF LIQUID JETS INJECTED INTO A HIGH-VELOCITY FLOW FIELD
Atomization and Sprays, Vol.4, 1994, issue 4
Nobuyuki Yatsuyanagi, Kazuo Sato, Hiroshi Sakamoto