图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.737 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 30, 2020 卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.v12.i4.20
pages 387-401

IMPROVED TAB MODEL FOR PREDICTION OF SPRAY DROPLET DEFORMATION AND BREAKUP

Jong-Hoon Park
School of Mechanical and Aerospace Engineering, Seoul National University, Seoul, Korea
Youngbin Yoon
Department of Mechanical and Aerospace Engineering, Seoul National University, Seoul, 08826, Republic of Korea
Sang-Soon Hwang
Department of Mechanical Engineering, University of Inchon, Inchon, Korea

ABSTRACT

An improved Taylor analogy breakup (TAB) model been proposed for more accurate prediction of the deformation and breakup of a spray. Especially, the effects of the droplet deformation on the droplet aerodynamic external force are considered in this model, which was neglected in the TAB model. It is found that the predicted droplet deformation using the present improved TAB model shows better agreement with experimental data than those of other models for the droplets in both bag-type and shear-type breakup regimes. A new breakup criterion has been proposed to predict more reasonable breakup quantities, such as breakup deformation length and breakup time; it is defined that the breakup occurs when the internal liquid-phase pressure of the deformed droplet at the equator is greater than that at the pole. The proposed breakup criterion shows more physical relationship between the degree of droplet deformation at breakup and the corresponding breakup Weber number as compared with the results using the TAB and the droplet deformation (DDB) models. Therefore, it provides better predictions of the experimental data than the TAB and DDB models for the droplet deformation and breakup time in both the bag-type and shear-type breakup regimes.


Articles with similar content:

NUMERICAL ANALYSIS OF THE INFLUENCE OF THE JET BREAKUP MODEL FORMULATION ON DIESEL ENGINE COMBUSTION COMPUTATIONS
Atomization and Sprays, Vol.8, 1998, issue 2
M. C. Cameretti, C. Bertoli, P. Belardini
EXPERIMENTAL AND SEMIANALYTICAL INVESTIGATION OF DROPLET DEFORMATION IN A CROSS-FLOW
Atomization and Sprays, Vol.29, 2019, issue 9
Sumit Joshi, T. N. C. Anand
THE FORMATION OF DROPS FROM VISCOELASTIC LIQUID JETS AND SHEETS−AN OVERVIEW
Atomization and Sprays, Vol.27, 2017, issue 4
Günter Brenn, Gregor Plohl
IMPROVING DROPLET BREAKUP AND VAPORIZATION MODELS BY INCLUDING HIGH PRESSURE AND TURBULENCE EFFECTS
Atomization and Sprays, Vol.10, 2000, issue 3-5
Iskendar Gokalp, Madjid Birouk, Christian Chauveau, Celine Morin, B. Vieille
GASOLINE SPRAYS INJECTED AT DIFFERENT BACK PRESSURES: CALCULATIONS USING TWO ATOMIZATION MODELS
Atomization and Sprays, Vol.17, 2007, issue 3
Salah S. Ibrahim, Graham Wigley, N. B. H. Abdelkarim, Assaad Masri