图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.737 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 30, 2020 卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.2014010413
pages 553-569

EXPERIMENTAL STUDIES ON AIR-ASSISTED ATOMIZATION OF JATROPHA PURE PLANT OIL

Avulapati Madan Mohan
Indian Institute of Technology Tirupati, Tirupati, 517507, India
R. V. Ravikrishna
Combustion & Spray Laboratory, Department of Mechanical Engineering, Indian Institute of Science, Bangalore, 560012, India

ABSTRACT

The present study focuses on exploring air-assisted atomization strategies for effective atomization of high-viscosity biofuels, such as pure plant oils (PPOs). The first part of the study concerns application of a novel air-assisted impinging jet atomization for continuous spray applications, and the second part concerns transient spray applications. The particle/droplet imaging analysis (PDIA) technique along with direct imaging methods are used for the purpose of spray characterization. In the first part, effective atomization of Jatropha PPO is demonstrated at gas-to-liquid ratios (GLRs) on the order 0.1. The effect of liquid and gas flow rates on the spray characteristics is evaluated, and results indicate a Sauter mean diameter (SMD) of 50 µm is achieved with GLRs as low as 0.05. In the second part of the study, a commercially available air-assisted transient atomizer is evaluated using Jatropha PPO. The effect of the pressure difference across the air injector and ambient gas pressure on liquid spray characteristics is studied. The results indicate that it is possible to achieve the same level of atomization of Jatropha as diesel fuel by operating the atomizer at a higher pressure difference. Specifically, a SMD of 44 µm is obtained for the Jatropha oil using injection pressures of <1 MPa. A further interesting observation associated with this injector is the near constancy of a nondimensional spray penetration rate for the Jatropha oil spray.


Articles with similar content:

CHARACTERIZATION OF A SPRAY FROM AN ULTRASONICALLY MODULATED NOZZLE
Atomization and Sprays, Vol.7, 1997, issue 3
I. P. Chung, A. Ganji, Derek Dunn-Rankin
EXPERIMENTAL STUDY ON SPRAY AND MIXTURE PROPERTIES OF THE GROUP-HOLE NOZZLE FOR DIRECT-INJECTION DIESEL ENGINES, PART I: A COMPARATIVE ANALYSIS WITH THE SINGLE-HOLE NOZZLE
Atomization and Sprays, Vol.19, 2009, issue 4
Keiya Nishida, Jian Gao, Yuhei Matsumoto
ATOMIZATION CHARACTERISTICS OF CAPILLARY LIQUID INJECTION INSIDE A VENTURI TUBE
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
H. Sun, Ming Chia Lai
AN EXPERIMENTAL STUDY ON MICROSCOPIC CHARACTERISTICS OF FLASH BOILING SPRAY WITH EXTENDED GLARE POINT VELOCIMETRY AND SIZING
Atomization and Sprays, Vol.26, 2016, issue 5
Shenghua Yang, Ming Jia, Zhuo Yao, Shiquan Shen, Tianyou Wang
AN EXPERIMENTAL STUDY ON EFFERVESCENT ATOMIZATION OF BIO-OIL FUELS
Atomization and Sprays, Vol.22, 2012, issue 8
R. V. Ravikrishna, Avulapati Madan Mohan