图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.v8.i6.30
pages 653-671

SPRAY FORMATION OF A HYDRAULIC FLAT FAN NOZZLE WITH AN INTERNALLY DISTURBED FLOW

Q. Zhou
Silsoe Research Institute, Wrest Park, Bedfordshire, U.K.
P. C. H. Miller
Silsoe Research Institute, Wrest Park, Silsoe, Bedfordshire, United Kingdom
P. J. Walklate
Silsoe Research Institute, Wrest Park, Bedfordshire, U.K.
N. H. Thomas
FAST Team, School of Chemical Engineering, University of Birmingham, Edgbaston, Birmingham, United Kingdom

ABSTRACT

The study investigated the effect of internal disturbances to the fluid flow in a typical agricultural flat fan nozzle on the liquid sheet structure, wavelength, breakup position, and finally the droplet size distribution. The internal disturbances were generated by a cylindrical insert upstream of the final orifice, and the magnitude was determined by the insert diameter. The liquid sheet structures were recorded using short-duration photography. The quantitative effects of the insert size on the breakup length and volume median droplet diameter (VMD) were measured using a phase Doppler analyzer (PDA). The results showed that it is possible to increase the droplet size, such that the proportion of spray volume in small droplets less than 100 μm is reduced by 45%, without significantly affecting the other spray characteristics such as the spray angle and spray pattern at a normal working pressure for agricultural spraying.


Articles with similar content:

CONTROLLING DROPLET-SIZE DISTRIBUTION USING OIL EMULSIONS IN AGRICULTURAL SPRAYS
Atomization and Sprays, Vol.20, 2010, issue 3
S. A. Wilson, Kuide Qin, Holger Tank, Brandon Downer, Lei Liu
EFFECT OF ATOMIZER INTERNAL GEOMETRY ON THE INTERNAL AND EXTERNAL TWO-PHASE FLOW IN EFFERVESCENT ATOMIZATION
Atomization and Sprays, Vol.27, 2017, issue 2
Aly H. Gadallah, Kamran Siddiqui, Mona Hassanzadeh Jobehdar, Wajid A. Chishty
EFFECT OF COANDA-DEFLECTION-OPENINGS ON THE SPRAY BEHAVIOR OF PRESSURE SWIRL NOZZLES
Atomization and Sprays, Vol.28, 2018, issue 3
Jens Kamplade, Peter Walzel, Ivette Hohlfeld, Marcus Kelz, Markus Thommes
EXPERIMENTAL INVESTIGATION OF THE ATOMIZATION CHARACTERISTICS OF ANTICORROSION WAX
Atomization and Sprays, Vol.23, 2013, issue 7
Sanghoon Lee, Sungwook Park
ATOMIZATION OF GEL FUELS USING IMPINGING-JET ATOMIZERS
International Journal of Energetic Materials and Chemical Propulsion, Vol.10, 2011, issue 1
Gabriela Adler, Anat Desyatkov, Benveniste Natan, Oleg Prokopov