图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.2015013372
pages 377-410

INTERNAL FLOW PATTERN AND MACROSCOPIC CHARACTERISTICS OF A FLASH-BOILING SPRAY ACTUATED THROUGH A TWIN-ORIFICE ATOMIZER WITH LOW INJECTION PRESSURE

Dehao Ju
Key Laboratory of Power Machinery and Engineering, Ministry of Education, Shanghai Jiao Tong University, No. 800, Dongchuan Road, Minhang District, 200240 Shanghai, People's Republic of China
Chunhai Wang
Key Laboratory of Power Machinery and Engineering, Ministry of Education, Shanghai Jiao Tong University, No. 800, Dongchuan Road, Minhang District, 200240 Shanghai, People's Republic of China
Xinqi Qiao
Key Laboratory of Power Machinery and Engineering, Ministry of Education, Shanghai Jiao Tong University, No. 800, Dongchuan Road, Minhang District, 200240 Shanghai, People's Republic of China
Jin Xiao
Key Laboratory of Power Machinery and Engineering, Ministry of Education, Shanghai Jiao Tong University, No. 800, Dongchuan Road, Minhang District, 200240 Shanghai, People's Republic of China
Zhen Huang
Key Laboratory of Power Machinery and Engineering, Ministry of Education, Shanghai Jiao Tong University, No. 800, Dongchuan Road, Minhang District, 200240 Shanghai, People's Republic of China

ABSTRACT

This work is to investigate the internal flow pattern and macroscopic spray characteristics of1,1,1,2- tetrafluoroethane (R134a) actuated through a twin-orifice atomizer. The geometry of the injector consists of one inlet orifice and one discharge nozzle separated by a cylindrical expansion chamber. Two inlet orifices with the diameters of 0.6 and 3.0 mm were conducted from the supply line of R134a to find the influence of the inlet orifice geometry on the flow and spray behavior. Four polymethacrylate atomizers were manufactured to study the effects of the various aspect ratios of expansion chambers and different diameters of discharge nozzles on the internal flow pattern and atomization characteristics. Here, the diameters of the discharge nozzles were 0.6 and 1.0 mm with the same aspect ratio of 10.0, and the aspect ratios of the expansion chambers were 0.5 and 1.0 with the same diameter of 13.0 mm. A low injection pressure of 0.6 MPa was used to produce a "stable" flash-boiling spray vertically in this work, and the ambient condition was atmospheric. The internal flow and spray images were recorded at various times after the start of actuation using a visualization system consisting of a high-speed digital camera and a metal halide lamp as the illumination source. Bubble growth, boiling phenomena in the expansion chamber, and external liquid atomization were observed simultaneously during the actuation. The transient continuous spray angles were measured at each case. The relationship between the internal boiling flow in the expansion chamber and external flash-boiling spray was analyzed. The most interesting observation is that the periodic bifurcations of the spray were formed by the twin-orifice injector when the inlet orifice diameter was 3.0 mm and the discharge nozzle diameter was 0.6 mm. This work provides a guide and reference for the volatile or liquefied material actuated through a twin-orifice atomizer with low injection pressure.


Articles with similar content:

EXPERIMENTAL INVESTIGATION OF JET BREAKUP AT LOW WEBER NUMBER
Atomization and Sprays, Vol.27, 2017, issue 9
Raj M. Manglik, S. Rajendran, Milind A. Jog
STUDY OF PRIMARY BREAKUP OF MOLTEN TIN DURING POWDER PRODUCTION IN FREE-FALL CONFIGURATION
Atomization and Sprays, Vol.27, 2017, issue 3
Shamit Bakshi, T. N. C. Anand, P. V. Sivaprasad, Supriya Sarkar, W. S. Prashanth
EFFECT OF NOZZLE HOLE GEOMETRY ON NON-EVAPORATING DIESEL SPRAY CHARACTERISTICS AT HIGH-PRESSURE INJECTION
Atomization and Sprays, Vol.22, 2012, issue 1
Jangsik Kong, Choongsik Bae
EXPERIMENTAL CHARACTERIZATION OF SHEAR COAXIAL INJECTORS USING LIQUID/GASEOUS NITROGEN
Atomization and Sprays, Vol.7, 1997, issue 5
M. J. Glogowski, C. Puissant
EXPERIMENTAL CHARACTERIZATION OF SHEAR COAXIAL INJECTORS USING LIQUID/GASEOUS NITROGEN
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
M. J. Glogowski, M. M. Micci, C. Puissant