图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.v10.i2.50
19 pages

CHARACTERIZATION OF PROTOTYPE HIGH-PRESSURE SWIRL INJECTOR NOZZLES, PART II: CFD EVALUATION OF INTERNAL FLOW

Changsoo Jang
Department of Mechanical Engineering, KAIST, Taejon, Korea
Choongsik Bae
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, 373-1, Gusong-dong, Yuseong-gu, Daejon, 305-701, Republic of Korea
Sangmin Choi
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Yusong-gu, Taejon, Korea

ABSTRACT

Static flow rate and initial cone angle of high-pressure swirl injector nozzles were characterized through measurements and computations as a preliminary optimization process of nozzle design. Prototype injectors were fabricated by modifying commercial multipoint injection (MPI) nozzles. Measurements of static flow rate were compared with the computations, and the agreements were satisfactory in values and tendencies with respect to the nozzle geometry and the needle lift. Initial cone angle was calculated and compared with measurements by the direct photographic imaging method. It could be predicted satisfactorily by introducing an adequate correction factor. Considering these cross-checking for a validation of the computational model, a parametric study was carried out to predict the flow rate and the initial cone angle with respect to selected design parameters.


Articles with similar content:

MODELING OF GROUP-HOLE-NOZZLE SPRAYS USING GRID-SIZE-, HOLE-LOCATION-, AND TIME-STEP-INDEPENDENT MODELS
Atomization and Sprays, Vol.19, 2009, issue 6
Rolf D. Reitz, Chang Sik Lee, Neerav Abani, Sung Wook Park, Hyun Kyu Suh
EFFECTS OF CANTED INJECTION ANGLES ON THE SPRAY CHARACTERISTICS OF LIQUID JETS IN SUBSONIC CROSSFLOWS
Atomization and Sprays, Vol.20, 2010, issue 9
Jinkwan Song, Min-Ki Kim, Jeongjae Hwang, Youngbin Yoon
ANALYSIS OF SIZE-CLASSIFIED SPRAY STRUCTURE AND ATOMIZATION MECHANISM FOR A GASOLINE DIRECT INJECTOR
Atomization and Sprays, Vol.14, 2004, issue 6
Chang Sik Lee, Chang Hee Lee
NUMERICAL INVESTIGATION OF VARIOUS SPRAY BREAKUP AND DROPLET COLLISION MODELS IN THE MODELING OF IN-CYLINDER FUEL SPRAY
Atomization and Sprays, Vol.22, 2012, issue 10
M. Mofarrahi, Reza Kamali
EXPERIMENTAL AND COMPUTATIONAL STUDY OF THE INFLUENCE OF PARTIAL NEEDLE LIFT ON NOZZLE FLOWIN DIESEL FUEL INJECTORS
Atomization and Sprays, Vol.22, 2012, issue 8
Jaime Gimeno, Raul Payri, Alejandro H. Plazas, O. Venegas