图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.737 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 30, 2020 卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.2012003740
pages 711-736

LARGE EDDY SIMULATION OF LIQUID JET ATOMIZATION

J. Chesnel
CORIA UMR 6614, University of Rouen, Technopole du Madrillet, BP 12, 76801 Saint-Etienne-du-Rouvray Cedex, France
Julien Reveillon
CORIA-UMR 6614 – Normandie Université, CNRS-Université et INSA de Rouen, Campus Universitaire du Madrillet, 76800 Saint Etienne du Rouvray, France
Thibaut Menard
CNRS, CORIA UMR 6614, University of Rouen, Technopole du Madrillet, BP 12, 76801 Saint- Etienne-du-Rouvray Cedex, France
Francois-Xavier Demoulin
CORIA-UMR 6614 – Normandie Université, CNRS-Université et INSA de Rouen, Campus Universitaire du Madrillet, 76800 Saint Etienne du Rouvray, France

ABSTRACT

In the past decade, numerical methods for two-phase flows, which are now capable of fully describing both phases and the interface, have progressed to a state of maturity. At present, direct numerical simulations (DNS) are possible even for complex configurations such as atomization processes. However, the numerical resources necessary to completely compute the atomization up to the formation of the final spray are still out of reach. Therefore, the large eddy simulation (LES) approach is very appealing for two-phase flows. Depending on the assumption concerning the relative size of the LES filter compared to the characteristic scale of interface wrinkles, two classes of LES methods have emerged: the first class of LES method is required close to the injector while the second class is needed far from the injector when the spray is formed. The present work describes a modeling proposal that solves this problem by focusing on the transition between these two classes of method for LES of two-phase flows. A postulated transport equation of the surface density is used to describe the subgrid spray formation ranging from interface wrinkling, ligaments, and sheets up to the droplets. Issued from Reynolds-averaged Navier-Stokes (RANS) formalisms, this transport equation extends the usual spherical geometry given to the liquid structures that compose the subgrid spray. This equation contains several source terms that act on the creation and destruction of the liquid/gas interface. Considering that major breakup processes are due to turbulence in the field near the injector, an appropriate source term is proposed. This source term, also derived from RANS models, introduces a local critical value of surface density related to a critical Weber number that provides information concerning the local equilibrium between turbulent kinetic energy and surface energy. Concerning the velocity field, a standard Smagorinsky approach is considered. The initial results, obtained through the simulation of the atomization of a liquid jet, confirm that the subgrid term of the liquid volume fraction transport equation determines the transition between the resolved interface and the subgrid spray. An LES model for continuous two-phase flows, termed CLES in this paper, is proposed. The CLES model allows for a better description of the liquid dispersion within the calculation domain from both qualitative and quantitative points of view when compared with the usual LES formalism that does not consider subgrid terms for the interfacial contribution. Mean liquid volume fraction profiles are well captured with CLES when compared to "a posteriori" DNS simulations, and only a weak grid dependency is observed. Grid dependency is generally a major drawback when carrying out LES of interfacial flows. The surface density and behavior are well estimated and described by using a dedicated transport equation. Based on this parameter and thanks to a good estimation of the critical Weber number value, relevant characteristic scales of the subgrid spray in the atomization regime can be obtained.


Articles with similar content:

Subgrid-scale interface model for atomizing high-speed liquid jets
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2009, issue
Helfried Steiner, D. Heidorn
Effect of LES closures on the entrainment of a passive scalar in a turbulent planar jet
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2012, issue
Ricardo J. N. dos Reis, Carlos B. da Silva, Venkatramanan Raman, D. C. Lopes
A NEW ADAPTIVE MULTISCALE METHOD FOR DIRECT NUMERICAL SIMULATION OF SHEARED LIQUID SHEET
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2015, issue
Jean-Luc Estivalezes, Davide Zuzio
A NEW MODEL FOR TURBULENT FLOWS WITH LARGE DENSITY FLUCTUATIONS: APPLICATION TO LIQUID ATOMIZATION
Atomization and Sprays, Vol.17, 2007, issue 4
Pierre-Arnaud Beau, R. Borghi, Francois-Xavier Demoulin, Arnaud Mura, Gregory Blokkeel
Subgrid analysis of liquid jet atomization
Atomization and Sprays, Vol.21, 2011, issue 1
Francois-Xavier Demoulin, Thibaut Menard, J. Chesnel, Julien Reveillon