图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.2015011058
pages 375-396

MORPHOLOGICAL EXPLORATION OF EMERGING JET FLOWS FROM MULTI-HOLE DIESEL INJECTORS AT DIFFERENT NEEDLE LIFTS

Seoksu Moon
AIST, Japan
Xusheng Zhang
Advanced Photon Source, Argonne National Laboratory, Argonne, USA; Merchant Marine College, Shanghai Maritime University, Shanghai, China
Jian Gao
Advanced Photon Source, Argonne National Laboratory, Argonne, USA; Propulsion Systems Research Lab., General Motors Global Research and Development, Warren, USA
Kamel Fezzaa
Advanced Photon Source, Argonne National Laboratory, Argonne, USA
Eric M. Dufresne
Advanced Photon Source, Argonne National Laboratory, Argonne, USA
Jin Wang
Advanced Photon Source, Argonne National Laboratory, Argonne, IL, USA
Xingbin Xie
Department of Mechanical Engineering, Wayne State University, Detroit, USA
Fengkun Wang
Department of Mechanical Engineering, Wayne State University, Detroit, USA
Ming Chia Lai
Department of Mechanical Engineering, Wayne State University, Detroit, MI 48202

ABSTRACT

The current study takes a morphological approach to interpret the emerging jet flows from multi-hole diesel injectors. Several types of multi-hole injectors, a six-hole injector and two two-hole injectors with different needle control mechanisms, were used to investigate the emerging jet flows and related flow breakup at different needle lifts. A short X-ray pulse with 150 ps duration was used to visualize the nearfield morphologies of the emerging jet flows using an ultrafast X-ray phase-contrast imaging technique. A few X-ray pulses with 68 ns periodicity were also used to analyze the dynamics of the emerging jet flows by tracking the movement of the structures inside the spray. At first, the effects of needle lift on emerging flow pattern and breakup were investigated using a six-hole injector under practical injection conditions. A highly expanding spray was observed at the low needle lifts. The degree of flow expansion was however suppressed with an increase in the needle lift. The higher degree of flow expansion at the low needle lifts promoted the flow breakup and increased the spray deceleration rate with an increase in the axial distance. Then, a detailed morphological study of the emerging flows was performed using two-hole nozzles under low injection pressures to slow down the flow breakup in order to figure out the intrinsic nature of the emerging flows associated with the nozzle internal flow. The phase-contrast images revealed clear morphologies of several branching flows inside the spray having different flowing directions and stretching the spray three-dimensionally that originate from complex nozzle internal flow pattern. The degree of flow expansion associated with the branching flows appeared differently with the needle lift with formation of various flow structures: cone shaped, stretched thin, and cylindrical. At certain needle lifts, the branching flows sometimes formed a couple of microwavelets inside the spray having different instability frequencies, indicating different origins of each flow associated with nozzle internal flow. Increasing ambient gas density did not alter the branching characteristics of the flows significantly, while increasing injection pressure and reducing the fuel viscosity significantly altered the branching flow characteristics.


Articles with similar content:

EFFECT OF CAVITATION IN CIRCULAR NOZZLE AND ELLIPTICAL NOZZLES ON THE SPRAY CHARACTERISTIC
Atomization and Sprays, Vol.20, 2010, issue 10
Choong-Won Lee, Sung Ryoul Kim, Kun Woo Ku, Jung Goo Hong
HOLOGRAPHIC INTERFEROMETRIC VISUALIZATION OF THE HIGH PRESSURE INJECTION OF MULTIPLE SUPERSONIC DIESEL FUEL JETS
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
K. Takayama, H. Sugihara, H. H. Shi, Y. Aoyagi
NUMERICAL SIMULATION OF SPRAY CHARACTERISTICS IN A PRESSURE-SWIRL NOZZLE
International Heat Transfer Conference 16, Vol.18, 2018, issue
Tao Zhang, Rui Jiang, Bo Dong, Weizhong Li
EXPERIMENTAL AND NUMERICAL STUDIES ON SPRAY CHARACTERISTICS OF AN INTERNAL OSCILLATING NOZZLE
Atomization and Sprays, Vol.29, 2019, issue 1
Wenbo Zhao, Wei Xie, Zhijun Wu, Liguang Li, Zongjie Hu, Jiachen Zhai, Yufeng Wang
MACROSCOPIC CHARACTERIZATION OF FLASH-BOILING MULTIHOLE SPRAYS USING PLANAR LASER-INDUCED EXCIPLEX FLUORESCENCE. PART II: CROSS-SECTIONAL SPRAY STRUCTURE
Atomization and Sprays, Vol.23, 2013, issue 3
David J. Cleary, Ming Zhang, Yuyin Zhang, Min Xu, Gaomimg Zhang