图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.v13.i23.60
22 pages

DEVELOPMENT AND ASSESSMENT OF A HYBRID DROPLET COLLISION MODEL FOR TWO IMPINGING SPRAYS

Gwon Hyun Ko
School of Mechanical Engineering, Chung-Ang University, Chung-Ang University 221, HeukSuk Dong, DongJak Ku, Seoul, 156-756, Korea
Seong Hyuk Lee
Chung-Ang University
Hong Sun Ryou
School of Mechanical Engineering, Chung-Ang University, Chung-Ang University 221, HeukSuk Dong, DongJak Ku, Seoul, 156-756, Korea
Young Ki Choi
Micro Thermal System Research Center, Department of Mechanical Engineering, Chung-Ang University, 221 HeukSuk-Dong, DongJak-Gu, Seoul, 156-756, KOREA

ABSTRACT

The present article proposes a new hybrid collision model to analyze the interspray impingement system. The new hybrid collision model proposes a new criterion for the collision threshold and also involves a collision-induced disintegration regime, together with three representative regimes, such as bouncing, separation, and coalescence. In particular, the new collision thresholds are devised to take account of both the preferred directions and the critical distance between the two impinging droplets from literature findings. A cumulative collision number is also introduced to effectively compare the differences between the present model and the original O’Rourke model. The interspray impingement systems are simulated under both low and high pressures of the gas phase, and the predictions are compared with experimental data such as spray shapes, Sauter mean diameter (SMD), and penetration lengths. The present model shows better agreement with experimental data in predicting droplet sizes for the low-gas-pressure case and spray patterns for the high-gas-pressure case than the O’Rourke model does. It is thus thought that the present hybrid model is acceptable in predicting the interspray impingement system effectively.


Articles with similar content:

INVESTIGATION OF CLUSTER-NOZZLE CONCEPTS FOR DIRECT INJECTION DIESEL ENGINES
Atomization and Sprays, Vol.19, 2009, issue 10
Hyun Woo Won, Norbert Peters
NUMERICAL INVESTIGATION OF VARIOUS SPRAY BREAKUP AND DROPLET COLLISION MODELS IN THE MODELING OF IN-CYLINDER FUEL SPRAY
Atomization and Sprays, Vol.22, 2012, issue 10
M. Mofarrahi, Reza Kamali
CHARACTERIZATION OF PROTOTYPE HIGH-PRESSURE SWIRL INJECTOR NOZZLES, PART I: PROTOTYPE DEVELOPMENT AND INITIAL CHARACTERIZATION OF SPRAYS
Atomization and Sprays, Vol.10, 2000, issue 2
Sangmin Choi, Changsoo Jang, Choongsik Bae
A COMPARISON OF DIESEL SPRAYS CFD MODELING APPROACHES: DDM VERSUS Σ-Y EULERIAN ATOMIZATION MODEL
Atomization and Sprays, Vol.26, 2016, issue 7
Jose M. Desantes, Jose M. Pastor, Adrian Pandal, Jose M. Garcia-Oliver
LARGE EDDY SIMULATION OF HIGH GAS DENSITY EFFECTS IN FUEL SPRAYS
Atomization and Sprays, Vol.23, 2013, issue 4
Martti Larmi, M. Nuutinen, Ossi Kaario, K. Keskinen, Tuomo Hulkkonen, Ville Vuorinen, Franz X. Tanner