图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.737 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 30, 2020 卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.v20.i3.10
pages 177-189

DIESEL SPRAY VISUALIZATION AND SHOCKWAVES

Harri Hillamo
School of Science and Technology, Aalto University; and Internal Combustion Engine Research Group, Department of Energy Technology, Helsinki University of Technology, Finland
Teemu Sarjovaara
Aalto University, Department of Energy Technology, Aalto University, FI-00076 Aalto, Finland
Ossi Kaario
Department of Mechanical Engineering, Aalto University, Aalto, Finland
Ville Vuorinen
Aalto University, School of Engineering, TKK, Internal Combustion Engine Research Group, Department of Energy Technology, Helsinki University of Technology, Finland
Martti Larmi
Department of Mechanical Engineering, Aalto University, Aalto, Finland

ABSTRACT

The paper discusses some fundamental spray properties and new aspects of measuring the spray behavior. The fuel injection measurements were done with marine common rail diesel injection equipment under nonevaporating conditions in a pressurized test rig. The tests were made at room temperature to ensure a constant environment for the sprays and to study the fundamentals of transient fuel jet. Fuel injection was performed with 1400 bar pressure to 35 kg/m3 ambient gas density with different nozzle orifices. Some fundamental phenomena in dense and high-velocity diesel spray can be confirmed by short exposure spray imaging. Imaging was based on planar illumination and digital imaging. The main findings were high-definition shockwave images. Shockwaves can be seen when the supersonic fuel spray exits the nozzle orifice. Shockwave imaging is used to estimate the velocity difference of the fuel and ambient gas. Boundary layer velocity measurements are shown at the vicinity of the nozzle orifice. Velocity measurements can be used to estimate nozzle discharge coefficients. The initial laminar core flow of the liquid and the collapse of this initial region were recorded. This may seem like a rather unlikely phenomenon in diesel injectors and it can well be considered as a special case. Spray-to-spray variation of the spray exit has also been recorded. Some time scales of the transient spray phenomena are also drawn.


Articles with similar content:

X-RAY MEASUREMENTS OF FUEL SPRAY SPECIFIC SURFACE AREA AND SAUTER MEAN DIAMETER FOR CAVITATING AND NON-CAVITATING DIESEL SPRAYS
Atomization and Sprays, Vol.29, 2019, issue 3
H.J. Seong, Daniel Duke, Alan L. Kastengren, Christopher F. Powell, Katarzyna E. Matusik, B.A. Sforzo, J. Ilavsky
EXPERIMENTAL INVESTIGATIONS ON A PIEZO-ACTIVATED HOLLOW CONE INJECTOR − PART II: THE INFLUENCE OF NEEDLE LIFT ON DROPLET SIZE DISTRIBUTIONS AND VORTEX FORMATION
Atomization and Sprays, Vol.24, 2014, issue 10
Graham Wigley, Konstantinos Boulouchos, B. Schneider, Andreas Schmid
EXPERIMENTAL CHARACTERIZATION OF INTERNAL NOZZLE FLOW AND DIESEL SPRAY BEHAVIOR. PART II: EVAPORATIVE CONDITIONS
Atomization and Sprays, Vol.15, 2005, issue 5
Jose M. Desantes, Raul Payri, Jose M. Pastor, Jose V. Pastor
VIEWS ON THE STRUCTURE OF TRANSIENT DIESEL SPRAYS
Atomization and Sprays, Vol.10, 2000, issue 3-5
Gregory J. Smallwood, Omer L. Gulder
PRIMARY BREAKUP IN GAS/LIQUID MIXING LAYERS FOR TURBULENT LIQUIDS
Atomization and Sprays, Vol.2, 1992, issue 3
L.-K. Tseng, P.-K. Wu, G. M. Faeth