图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.v6.i2.60
pages 227-244

SHEAR COAXIAL INJECTOR ATOMIZATION PHENOMENA FOR COMBUSTING AND NONCOMBUSTING CONDITIONS

Sibtosh Pal
Propulsion Engineering Research Center and Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania, USA
M. D. Moser
Propulsion Engineering Research Center and Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania, USA
H. M. Ryan
Propulsion Engineering Research Center and Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania, USA
M. J. Foust
Propulsion Engineering Research Center and Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania, USA
Robert J. Santoro
Propulsion Engineering Research Center and Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania

ABSTRACT

Measurements of liquid oxygen (LOX) drop size and velocity in a unielement liquid-propellant rocket chamber are presented along with complementary measurements of drop size/velocity for simulants under cold flow conditions. The drop size comparisons between the cold flow and hot-fire conditions showed that the drops were larger for combusting conditions. This observation is argued to be consistent with effects due to differences in the flow fields between hot-fire and cold flow conditions and more rapid vaporization of smaller drops under combusting conditions. The use of the phase Doppler particle analyzer (PDPA) in obtaining temporally averaged probability density functions of drop size in a harsh rocket environment has been demonstrated. The PDPA measurements indicate that the atomization process is characterized by either the presence of nonspherical liquid structures or the production of extensive dense drop regions under these conditions. Finally, the need for more extensive studies under a wider variety of chamber conditions is indicated.


Articles with similar content:

INTERNAL AND NEAR-NOZZLE FLOW OF A PRESSURE-SWIRL ATOMIZER UNDER VARIED FUEL TEMPERATURE
Atomization and Sprays, Vol.17, 2007, issue 6
Jaejoon Choi, Essam Abo-Serie, Choongsik Bae, Seoksu Moon
DROPLET SIZE AND VELOCITY MEASUREMENTS IN A CRYOGENIC JET FLAME OF A ROCKET-TYPE COMBUSTOR USING HIGH-SPEED IMAGING
Atomization and Sprays, Vol.26, 2016, issue 5
Yves Le Sant, Arnaud Ristori, Lucien Vingert, Nicolas Fdida
MEASUREMENTS OF DIESEL SPRAY DYNAMICS AND THE INFLUENCE OF FUEL VISCOSITY USING PIV AND SHADOWGRAPHY
Atomization and Sprays, Vol.21, 2011, issue 2
C. Bong, P. A. Brandner, Laurie Goldsworthy
STRUCTURE OF A NONEVAPORATING SWIRL INJECTOR SPRAY
Atomization and Sprays, Vol.7, 1997, issue 1
Richard Eskridge, Douglas A. Feikema, John J. Hurt
AN EXPERIMENTAL STUDY ON GASOLINE DIRECT-INJECTION SPRAY AND ATOMIZATION CHARACTERISTICS OF ALCOHOL FUELS AND ISOOCTANE
Atomization and Sprays, Vol.21, 2011, issue 5
Himesh Patel, Shanshan Yao, Ji Zhang, Tiegang Fang