图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.2017020419
pages 691-706

INFLUENCE OF PIEZO-DRIVEN SYNTHETIC JET ON WATER SPRAY BEHAVIOR

Matteo Chiatto
Department of Industrial Engineering, University of Naples "Federico II," Naples, 80125, Italy
Luca Marchitto
Istituto Motori-CNR
G. Valentino
IstitutoMotori, CNR, Naples, 80125, Italy
Luigi de Luca
Department of Industrial Engineering, University of Naples "Federico II," Naples, 80125, Italy

ABSTRACT

The opportunity of directly managing the spray formation and its characteristics has gained much interest in the last few years, due to the various active flow control methods available nowadays. In this work particle image velocimetry (PIV) has been applied to investigate the effect of a piezo-driven synthetic jet (SJ) on the droplet velocity distribution of a water spray. Tests were carried out under atmospheric conditions within a chamber test rig, equipped with optical accesses, at two injection pressures, namely, 5 and 10 MPa, exploring the variation of the spray flow field caused by the synthetic jet perturbations. The SJ orifice axis has been placed 45 deg tilted with respect to the water spray axis, and the nozzle body has been moved along its own axis for three different positions. PIV measurements have been averaged on 300 trials. For each operation condition, the actual influence region of the SJ has been evaluated through a T-test algorithm. The synthetic jet locally interacts with the spray, remarkably energizing the region downstream of the impact. The effectiveness of the actuator decreases for higher injection pressures and shorter distances between spray nozzle and SJ orifice. The study has been corroborated by a vorticity field analysis, which is able to identify the influence of coherent vortex structures generated by the air jet, in terms of both droplet momentum and droplet spreading variations.


Articles with similar content:

EFFECTS OF CANTED INJECTION ANGLES ON THE SPRAY CHARACTERISTICS OF LIQUID JETS IN SUBSONIC CROSSFLOWS
Atomization and Sprays, Vol.20, 2010, issue 9
Jinkwan Song, Min-Ki Kim, Jeongjae Hwang, Youngbin Yoon
INVESTIGATIONS OF COMMON-RAIL FUEL INJECTION TECHNIQUE IN DI-DIESEL-ENGINES
Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV, Vol.0, 2000, issue
Franz Mayinger, B. Ofner, S. Eisen
MACROSCOPIC AND MICROSCOPIC CHARACTERISTICS OF GASOLINE AND BUTANOL SPRAY ATOMIZATION UNDER ELEVATED AMBIENT PRESSURES
Atomization and Sprays, Vol.28, 2018, issue 9
Yanfei Li, Hengjie Guo, Yitao Shen, Liuyang Feng, Xiao Ma, Longfei Chen
SYSTEM DESIGN AND EXPERIMENTAL INVESTIGATION ON HIGHTEMPERATURE AND HIGH-PRESSURE SPRAY FLASH EVAPORATION
International Heat Transfer Conference 16, Vol.18, 2018, issue
Naihua Wang, Zhigang Liu, Can Ji, Lin Cheng
THE INTERACTION BETWEEN DIESEL SPRAYS AND POROUS MEDIA: EFFECT OF MEDIUM PORE DENSITY AND INJECTION PRESSURE
Journal of Porous Media, Vol.15, 2012, issue 6
Navid Shahangian, Jamil Ghojel