图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.2014008296
pages 467-493

THE EFFECT OF FLASH BOILING ON THE ATOMIZATION PERFORMANCE OF GASOLINE DIRECT INJECTION MULTISTREAM INJECTORS

Mehdi Mojtabi
SUPii Mecavenir Puteaux France
Graham Wigley
Aeronautical and Automotive Engineering, Stewart Miller Building, Loughborough University, Leicestershire LE11 3TU, United Kingdom
Jerome Helie
Continental Automotive AG, Toulouse, France

ABSTRACT

In this work the effect of flash boiling on liquid breakup and atomization is first reviewed and then described in detail for the sprays produced by two high-pressure multistream gasoline direct injectors. They were operated at 120 and 200 bar pressure with a fuel injection duration of 0.8 ms into subatmospheric pressures between 1 and 0.1 bar and four temperatures between 20 and 100°C. The sprays were injected into an optically accessed chamber whose temperature and pressure were independently controlled to recreate the conditions found in an engine likely to cause flash boiling. Shadowgraph imaging with a single-shot charge-coupled device camera was applied to obtain images of the spray morphology under a matrix of the above conditions. The interaction between spray streams is particularly complex under flash boiling conditions being a function of the nature of the fuel and the geometry of the injector. In this investigation, three different fuels, regular RON-95 gasoline and single components fuels, n-heptane and iso-octane, were used with two different injectors, one with a 60 degree and the other with a 90 degree nominal external cone angle. In total, five variables were investigated: fuel pressure, ambient pressure, ambient temperature, fuel composition, and injector geometry. Once processed, the recorded images allowed measurement of spray tip penetration and cone angle. Qualitative data on the change in shape of the spray were also available. The results showed that flash boiling has potential to reduce droplet diameters and improve fuel vaporization; however, the associated change in spray shape must be taken into account to avoid problems with spray impingement.


Articles with similar content:

EFFECT OF OPERATING CONDITIONS AND FUEL VOLATILITY ON DEVELOPMENT AND VARIABILITY OF SPRAYS FROM GASOLINE DIRECT-INJECTION MULTIHOLE INJECTORS
Atomization and Sprays, Vol.19, 2009, issue 3
Pavlos Aleiferis, Z. van Romunde
COMPARISON AND CROSS-VALIDATION OF OPTICAL TECHNIQUES IN DIFFERENT SWIRL SPRAY REGIMES
Atomization and Sprays, Vol.23, 2013, issue 8
Ranganathan Kumar, Joshua Lee, Saptarshi Basu
SPRAY VELOCITY AND DROP SIZE MEASUREMENTS IN FLASHING CONDITIONS
Atomization and Sprays, Vol.19, 2009, issue 2
Renaud Lecourt, Johan Steelant, Philippe Barricau
INVESTIGATION OF RAPID ATOMIZATION AND COLLAPSE OF SUPERHEATED LIQUID FUEL SPRAY UNDER SUPERHEATED CONDITIONS
Atomization and Sprays, Vol.26, 2016, issue 12
Hujie Pan, David L. S. Hung, Tianyun Li, Min Xu, Shengqi Wu
A COMPARATIVE STUDY OF ROOM-TEMPERATURE AND COMBUSTING FUEL SPRAYS NEAR THE INJECTOR TIP USING INFRARED LASER DIAGNOSTICS
Atomization and Sprays, Vol.8, 1998, issue 5
Terry Parker, L. R. Rainaldi, W. T. Rawlins