图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.v14.i5.40
18 pages

CHARACTERIZATION OF INITIAL SPRAY FROM A D.I. GASOLINE INJECTOR BY HOLOGRAPHY AND LASER DIFFRACTION METHOD

Tie Li
Graduate School of Industrial Technology, Kinki University, Higashi-Hiroshima, Japan
Keiya Nishida
Department of Mechanical System Engineering, University of Hiroshima, 1-4-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8527, Japan
Hiroyuki Hiroyasu
Institute of Industrial Technology, Kinki University, Higashi-Hiroshima, Japan

ABSTRACT

In the injection of a high-pressure swirl injector for direct-injection (D.I.) gasoline engine use, an initial spray (also called a leading spray or a preswirl spray [1]) is generated from the fuel downstream of the swirl grooves in the initial stage of the injection. This initial spray is almost unaffected by tangential forces, it has feeble swirl velocity, and it atomizes poorly. The initial spray has different characteristics and behavior than the main spray, such as larger droplet size, farther penetration distance, and irregular shape. Therefore, the air—fuel mixing process of the initial spray is quite different from that of the main spray.
In this study, the structure of the initial spray by a high-pressure swirl injector for D.I. gasoline engine use is analyzed from observation of the reconstructed images of a hologram. The origins of the initial spray are clarified by observing the spray structures with and without cleaning the injection hole, and by comparing the volume of the initial spray with those of the injector interior, such as the annular volume and tangential grooves. The droplet size distributions in the initial spray at different imaging times are investigated. The spatial distribution of the droplet size in the initial spray is clarified, as are the effects of ambient pressure on the characteristics of the initial spray. Finally, the temporal variations of droplet size of the whole spray at fixed position is studied by a laser diffraction-based method, and the results are compared to the holographic results.


Articles with similar content:

CHARACTERISTICS OF TRANSIENT, SWIRL-GENERATED, HOLLOW-CONE SPRAYS
Atomization and Sprays, Vol.16, 2006, issue 5
Julian T. Kashdan, John S. Shrimpton
EXPERIMENTAL INVESTIGATIONS ON A PIEZO-ACTIVATED HOLLOW CONE INJECTOR − PART II: THE INFLUENCE OF NEEDLE LIFT ON DROPLET SIZE DISTRIBUTIONS AND VORTEX FORMATION
Atomization and Sprays, Vol.24, 2014, issue 10
Graham Wigley, Konstantinos Boulouchos, B. Schneider, Andreas Schmid
THE INFLUENCE OF ECCENTRICITY ON THE PERFORMANCE OF A COAXIAL PREFILMING AIR-ASSIST ATOMIZER
Atomization and Sprays, Vol.11, 2001, issue 1
Thomas Richter, Andreas Glathe, Gunter Wozniak
TRANSIENT 3D ANALYSIS OF A Dl GASOLINE INJECTOR SPRAY
Atomization and Sprays, Vol.9, 1999, issue 5
R. J. R. Johns, Colin J. Bates, Phil J. Bowen, M. A. Comer, S. M. Sapsford
CHARACTERISTIC STUDY ON THE LIKE-DOUBLET IMPINGING JETS ATOMIZATION
Atomization and Sprays, Vol.9, 1999, issue 3
Wennon Huang, Tsung-Leo Jiang, Wei-Hsiang Lai