图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.2015013285
pages 713-737

A COMPARISON OF DIESEL SPRAYS CFD MODELING APPROACHES: DDM VERSUS Σ-Y EULERIAN ATOMIZATION MODEL

Jose M. Desantes
CMT-Motores Termicos, Universitat Politecnica de Valencia, 46022, Spain
Jose M. Garcia-Oliver
CMT Motores Termicos−Universitat Politecnica de Valencia, Camino Vera s/n−46022 Valencia, Spain
Jose M. Pastor
CMT-Motores Termicos - Universitat Politecnica de Valencia
Adrian Pandal
Universidad de Oviedo

ABSTRACT

A comparison between the Σ-Y atomization model and a classical DDM approach has been carried out for diesel spray computational fluid dynamics (CFD) simulations. The Σ-Y model, originally proposed by Vallet and Borghi, is based on a Eulerian representation of the spray atomization and dispersion by means of a single-fluid variable density turbulent flow. The locally homogeneous flow approach has been applied to develop a spray vaporization model based on state relationships. A finite-volume solver for model equations has been created using the OpenFOAM CFD open-source C++ library. In the case of the Lagrangian-discrete droplet method (DDM) approach, the original dieselFoam solver of OpenFOAM is used. Model predictions have been compared to experimental measurements of free diesel sprays under vaporizing conditions from the database of the Engine Combustion Network (ECN). Accurate predictions of liquid and vapor spray penetration, as well as mixture fraction, can be achieved for the nominal condition with both models, although DDM simulations tend to be less accurate. Additionally, the near nozzle flow structure of the Spray A condition of ECN is also studied with both models. The conclusion is a more accurate prediction of the near-field internal structure of the spray in the case of the Eulerian model, due to both a higher mesh resolution and a more adequate modeling approach. Consequently, results shown in this work put in evidence the benefits of using a Eulerian model to predict qualitatively and accurately the diesel spray behavior under different ambient conditions and injection pressures.


Articles with similar content:

DIESEL SPRAY CFD SIMULATIONS BASED ON THE Σ-Υ EULERIAN ATOMIZATION MODEL
Atomization and Sprays, Vol.23, 2013, issue 1
E. Baldwin, N. Trask, David P. Schmidt, Jose M. Pastor, Adrian Pandal, Jose M. Garcia-Oliver
MULTIDIMENSIONAL SIMULATION OF CAVITATING FLOWS IN DIESEL INJECTORS BY A HOMOGENEOUS MIXTURE MODELING APPROACH
Atomization and Sprays, Vol.18, 2008, issue 2
Olivier Simonin, Chawki Habchi, Nicolas Dumont
Numerical Simulation of H2-LOx Combustion Under Supercritical Condition
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Malay Kumar Das, Ashoke De, Rupesh Sinha
A Study of the Two-Way Coupling Modeling for the Two-Phase Flow Simulation in a Lean Premixer Prevaporizer Module
International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 4-6
D. Bissieres, G. Lavergne, P. Trichet
ATOMIZATION MODELLING OF LIQUID JETS USING A TWO-SURFACE-DENSITY APPROACH
Atomization and Sprays, Vol.25, 2015, issue 1
Chawki Habchi, Bejoy Mandumpala Devassy, Eric Daniel