图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.v20.i1.10
pages 1-17

COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF THE ELECTROSTATIC SPRAY PAINTING PROCESS WITH A ROTATING BELL CUP

Valerio Viti
Ansys, Inc.
J. Kulkarni
Ansys, Inc., 10 Cavendish Court, Lebanon, NH 03766
A. Watve
ANSYS Fluent India Pvt. Ltd, Pune Infotech Park, Pune

ABSTRACT

The use of electrostatic fields in the spray painting process is a common technique utilized to increase the transfer efficiency of the process and the quality of the applied coating. The electrostatic field is usually generated by applying a voltage differential between the spray gun and the grounded target surface so that the electric potential will drive the charged droplets toward the target. In modern booths, the coatings are often applied via rotating cup-type spray guns mounted on automated robotic arms that move along preprogrammed trajectories. In such systems, the paint droplets are generated by the atomization of the thin film of paint that covers the surface of the rotating cup when it hits the serrated cup rim. The so-formed droplets are charged with the same potential polarity as the spray gun via induction or corona charging and are pushed by the electrostatic force toward the grounded target surface. In addition to the electrostatic force, a strong airflow coaxial with the spray gun, referred to as "shaping air," helps convection of the droplets toward the target. This process typically occurs in a painting booth where, for safety reasons and according to regulations, a strong crossflow of air-conditioned air exists. The interaction of these three forces as well as the particle size determines the path that the droplets will follow and ultimately the location of their deposition. While the general characteristics of the electrostatic spray painting process are well understood, there is a lack of detailed physical analysis that is essential for the optimization of the process. The present work makes use of CFD methods to analyze the interaction of the flow field with the electrostatic field and the effect that their coupling has on the paint droplets. While the flow field and the electrostatic field are computed using an Eulerian approach through the use of a finite volume formulation, the droplet trajectory is computed using a Lagrangian scheme that tracks each particle trajectory by integrating its equation of motion. The paint droplets have an initial size distribution determined by experiment, and their initial specific electrostatic charge is calculated following empirical correlations and basic principles. The coupling between the flow field and the electrostatic field is given by the computed particle trajectories since the motion of the particle is affected both by the flow field and the electrostatic field and, in turn, the electrostatic field is affected by the particle motion via the space charge. Flow turbulence effects are computed using the realizable k − ε model, and particle turbulent dispersion is computed using a random-walk approach. The CFD commercial code Fluent was used to perform these simulations since the off-the-shelf code is capable of simulating the flow field and the electrostatic field as well as the particle trajectories. In addition to these standard models, specific subroutines were written to compute the interaction of the droplets with the electrostatic field via the space charge. A graphic user interface was developed in order to make the setup of these simulations faster and more consistent so that a high degree of repeatability can be achieved. The present paper is a summary of the ongoing work being performed in this area at the Lebanon Ansys office.


Articles with similar content:

Numerical and Experimental Investigations of the Spray Coating Process
International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 1-3
M. Ruger, A. Lindenthal, Joachim Domnick, Martin Sommerfeld
The influence of the dispersion model and electrochemical forces on nanoparticle deposition in a turbulent flow
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2012, issue
A. Mehel
Design of industrial plant using optimised heat transfer and fluid flow modelling
International Heat Transfer Conference 12, Vol.1, 2002, issue
Darius Singh, Gordon D. Mallinson
NUMERICAL MODELING AND PREDICTION OF PARTICLE SIZE DISTRIBUTION DURING GAS ATOMIZATION OF MOLTEN TIN
Atomization and Sprays, Vol.26, 2016, issue 1
Shamit Bakshi, P. V. Sivaprasad, Supriya Sarkar
On Maneuvering of the Wheeled Transport Robot
Journal of Automation and Information Sciences, Vol.44, 2012, issue 12
Vladimir B. Larin