图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.2012003470
pages 799-817

THE EFFECT OF INITIAL AMBIENT TURBULENCE LEVELS ON ISO-OCTANE INJECTION SPRAYS

I. Elbadawy
Institute of Engineering Thermofluids, Surfaces and Interfaces, School of Mechanical Engineering, University of Leeds, Leeds, LS2 9JT, United Kingdom
P. H. Gaskell
School of Engineering and Computing Sciences, Durham University, Durham, DH1 3LE, United Kingdom
Malcolm Lawes
Institute of Engineering Thermofluids, Surfaces and Interfaces, School of Mechanical Engineering, University of Leeds, Leeds, LS2 9JT, United Kingdom
H. M. Thompson
Institute of Engineering Thermofluids, Surfaces and Interfaces, School of Mechanical Engineering, University of Leeds, Leeds, LS2 9JT, United Kingdom

ABSTRACT

Iso-octane, injected at high pressure into ambient nitrogen with different prescribed nearly isotropic turbulence levels, characterized by the root-mean-square (RMS) turbulence velocity, is explored experimentally. Mie scatter laser sheet and Schlieren techniques are combined with a high-speed camera to capture images of the vapor and liquid phases simultaneously as a function of injection pressure and ambient turbulence level. These indicate that the latter has a significant influence on tip penetration length, penetration width, cross-sectional area, and velocity. Increased initial ambient turbulence levels lead to reductions in the penetration length in the axial direction and increases in the penetration width in the radial direction; it is also shown to improve fuel evaporation and mixing.


Articles with similar content:

EXPERIMENTAL INVESTIGATIONS ON A PIEZO-ACTIVATED HOLLOW CONE INJECTOR − PART I: MEASUREMENT OF NEEDLE LIFT AND ITS INFLUENCE ON SPRAY MORPHOLOGY
Atomization and Sprays, Vol.24, 2014, issue 10
Graham Wigley, Konstantinos Boulouchos, B. Schneider, Andreas Schmid
STUDY OF AMBIENT TURBULENCE EFFECTS ON DIESEL SPRAYS IN A FAN-STIRRED VESSEL
Atomization and Sprays, Vol.16, 2006, issue 6
Tamas Jakubik, Malcolm Lawes, Miroslav Jicha, Robert M. Woolley
SPRAY CHARACTERISTICS OF A GROUP-HOLE NOZZLE FOR DIRECT-INJECTION DIESEL ENGINES
Atomization and Sprays, Vol.16, 2006, issue 1
Shinsuke Nomura, Keiya Nishida, Tomoaki Ito, Yuyin Zhang
INVESTIGATIONS OF COMMON-RAIL FUEL INJECTION TECHNIQUE IN DI-DIESEL-ENGINES
Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV, Vol.0, 2000, issue
Franz Mayinger, B. Ofner, S. Eisen
QUANTITATIVE ANALYSES OF FUEL SPRAY-AMBIENT GAS INTERACTION BY MEANS OF LIF-PIV TECHNIQUE
Atomization and Sprays, Vol.21, 2011, issue 6
Olawole Abiola Kuti, Keiya Nishida, Jingyu Zhu, Seoksu Moon