图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.v21.i1.10
pages 1-16

Dynamic Primary Atomization Characteristics in an Airblast Atomizer, High Pressure Conditions

Vital Gutierrez Fernandez
Heterogeneous, Multiphase Flows Unit, Aerodynamic and Energetic Models Department, Office National d'Etudes et de la Recherche Aérospatiales (ONERA), Toulouse, France
G. Lavergne
Heterogeneous, Multiphase Flows Unit, Aerodynamic and Energetic Models Department, Office National d'Etudes et de la Recherche Aérospatiales (ONERA), 31055 Toulouse Cedex 4, France
P. Berthoumieu
Heterogeneous, Multiphase Flows Unit, Aerodynamic and Energetic Models Department, Office National d'Etudes et de la Recherche Aérospatiales (ONERA), 31055 Toulouse Cedex 4, France

ABSTRACT

The primary atomization was studied experimentally for several flow configurations, in a planar airblast atomizer. The liquid sheet injected had a 300μm thickness. The employed techniques were Laser Oscillometry, LDV-PDI, PIV and flow visualization via fast camera. In the liquid flow, the momentum flux was varied by injecting both water and kerosene JET A1 at several velocities. Conversely, the airflow momentum flux was modified by adjusting both its velocity and absolute pressure. The latter parameter reached a value of 11bar. The atomization mechanisms described in the literature at standard conditions, were observed at the high pressure environments, as long as, the momentum flux ratio, M, remained constant. Furthermore, a new atomization mechanism was observed for values of M beyond 20. This regime was referred as membrane break-up due to the predominant structures observed. The results presented in this manuscript correspond to characteristics related to the sheets's motion: The global oscillation frequency, the wave velocity gradient in the intact sheet region and the sauter mean diameter far from the injector lips. Furthermore, these variables displayed a weak change both in magnitude and behaviour with the changes in atomization mechanisms. A set of empirical relations are provided to link these characteristics witht the flow conditions.


Articles with similar content:

CHARACTERIZATION OF THE INITIAL SPRAY FROM LOW-WEBER-NUMBER JETS IN CROSSFLOW
Atomization and Sprays, Vol.21, 2011, issue 7
Andre W. Marshall, Yinghui Zheng
PENETRATION OF LIQUID JETS IN A CROSS-FLOW
Atomization and Sprays, Vol.16, 2006, issue 8
Jong Guen Lee, Jacob N. Stenzler, Domenic A. Santavicca, Wonnam Lee
Geometric Primary Atomization Characteristics in an Airblast Atomizer, High Pressure Conditions
Atomization and Sprays, Vol.21, 2011, issue 1
P. Berthoumieu, G. Lavergne, Vital Gutierrez Fernandez
SPRAY CHARACTERISTICS OF A PRESSURE-SWIRL FUEL INJECTOR SUBJECTED TO A CROSSFLOW AND A COFLOW
Atomization and Sprays, Vol.21, 2011, issue 8
Barry Kiel, Ryan G. Batchelor, Amy Lynch, Mark Reeder, James Gord, Joseph Miller
PRIMARY BREAKUP IN GAS/LIQUID MIXING LAYERS FOR TURBULENT LIQUIDS
Atomization and Sprays, Vol.2, 1992, issue 3
L.-K. Tseng, P.-K. Wu, G. M. Faeth