每年出版 12 期
ISSN 打印: 1044-5110
ISSN 在线: 1936-2684
Indexed in
EFFECT OF CAVITATION IN CIRCULAR NOZZLE AND ELLIPTICAL NOZZLES ON THE SPRAY CHARACTERISTIC
摘要
The fuel spray characteristic is one of the most important factors to improve combustion performance. Fuel spray characteristics are affected by the internal flow of liquid in the nozzle. Cavitation is a major factor that influences internal flow. In order to investigate the effects of cavitation phenomena in a circular nozzle and elliptical nozzles, all of the test nozzles in this study were made of transparent acrylic for visualization. The cross-sectional areas of all nozzles were approximately the same, based on a 3 mm diameter circular nozzle. The aspect ratios (a/b) of elliptical nozzles were 2 and 3, respectively. The internal flow in the test nozzle and the external flow were visualized and analyzed by using the images captured from the charge-coupled device (CCD) camera to investigate the effects of cavitation on the liquid jet under various injection pressures. The discharge coefficient tended to decrease with increasing pressure. The cavitation in elliptical nozzles was generated at a lower Reynolds number than the circular nozzle. Elliptical nozzles had a lower discharge coefficient than the circular nozzle at the same Reynolds number. The cavitation length at the major axis plane was longer than that of the minor axis plane in elliptical nozzles. The spray angle was increased with injection pressure. The spray angle in the elliptical nozzles was larger than in the circular nozzles.
-
Molina S., Salvador F.J., Carreres M., Jaramillo D., A computational investigation on the influence of the use of elliptical orifices on the inner nozzle flow and cavitation development in diesel injector nozzles, Energy Conversion and Management, 79, 2014. Crossref
-
Leng Xianyin, He Zhixia, Jin Yu, Zhong Wenjun, Long Wuqiang, Characterization of Internal Flow of Intersecting Hole Nozzle for Diesel Engines, SAE Technical Paper Series, 1, 2015. Crossref
-
Ku K.W., Hong J.G., Effect of Flow Structure Inside Nozzle on the Liquid Jet Breakup of Elliptical Nozzle, Journal of ILASS-Korea, 18, 1, 2013. Crossref
-
Salvador F.J., Jaramillo D., Romero J.-V., Roselló M.-D., Using a homogeneous equilibrium model for the study of the inner nozzle flow and cavitation pattern in convergent–divergent nozzles of diesel injectors, Journal of Computational and Applied Mathematics, 309, 2017. Crossref
-
Salvador FJ, De la Morena J, Crialesi-Esposito M, Martínez-López J, Comparative study of the internal flow in diesel injection nozzles at cavitating conditions at different needle lifts with steady and transient simulations approaches, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 232, 8, 2018. Crossref
-
Song Yoonho, Hwang Donghyun, Ahn Kyubok, Effect of Orifice Geometry on Flow Characteristics of Liquid Jet from Single Hole Nozzle, Journal of the Korean Society of Propulsion Engineers, 21, 5, 2017. Crossref
-
Payri Raul, De La Morena Joaquin, Monsalve-Serrano Javier, Pesce Francesco Concetto, Vassallo Alberto, Impact of counter-bore nozzle on the combustion process and exhaust emissions for light-duty diesel engine application, International Journal of Engine Research, 20, 1, 2019. Crossref
-
Yu Shenghao, Yin Bifeng, Deng Weixin, Jia Hekun, Ye Ze, Xu Bin, Xu Huaping, Internal flow and spray characteristics for elliptical orifice with large aspect ratio under typical diesel engine operation conditions, Fuel, 228, 2018. Crossref
-
Yu Shenghao, Yin Bifeng, Deng Weixin, Jia Hekun, Ye Ze, Xu Bin, Xu Huaping, Experimental study on the spray and mixing characteristics for equilateral triangular and circular nozzles with diesel and biodiesel under high injection pressures, Fuel, 239, 2019. Crossref
-
Yu Shenghao, Yin Bifeng, Deng Weixin, Jia Hekun, Ye Ze, Xu Bin, Xu Huaping, Experimental study on the spray characteristics discharging from elliptical diesel nozzle at typical diesel engine conditions, Fuel, 221, 2018. Crossref
-
Yu Shenghao, Yin Bifeng, Deng Weixin, Jia Hekun, Ye Ze, Xu Bin, Xu Huaping, An experimental comparison of the elliptical and circular nozzles spray and mixing characteristics under different injection pressures, Fuel, 236, 2019. Crossref
-
Ma Yanhong, Gao Di, Zhang Dayi, Hong Jie, Compressive and dissipative behavior of metal rubber under constraints, physica status solidi (b), 252, 7, 2015. Crossref
-
Chiatti Giancarlo, Chiavola Ornella, Palmieri Fulvio, Pompei Roberto, On the Influence of the Slot Orifice in Diesel Common Rail Nozzle, The Open Fuels & Energy Science Journal, 11, 1, 2018. Crossref
-
Yin Bifeng, Xu Bin, Jia Hekun, Yu Shenghao, The Effect of Elliptical Diesel Nozzles on Spray Liquid-Phase Penetration under Evaporative Conditions, Energies, 13, 9, 2020. Crossref
-
Dai Xiaoyu, Wang Ziman, Liu Fushui, Pei Yiqiang, Gong Chao, Li Zhishuang, The effect of nozzle structure and initial state on the primary breakup of diesel spray, Fuel, 280, 2020. Crossref
-
Yadav Prem, Kumar Naveen, Gautam Raghvendra, Improvement in performance of CI engine using various techniques with alternative fuel, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2021. Crossref
-
Jia Hekun, Wei Zhuangbang, Yin Bifeng, Liu Zhiyuan, Analysis of elliptical diesel nozzle spray dynamics using a one-way coupled spray model, International Journal of Engine Research, 2021. Crossref
-
Yu Shenghao, Yin Bifeng, Jia Hekun, Chen Chen, Xu Bin, Investigation of inner cavitation and nozzle exit flow patterns for elliptical orifice GDI injectors with various aspect ratios, International Communications in Heat and Mass Transfer, 129, 2021. Crossref
-
Salvador F.J., Pastor J.M., De la Morena J., Martínez-Miracle E.C., Computational study on the influence of nozzle eccentricity in spray formation by means of Eulerian Σ - Y coupled simulations in diesel injection nozzles, International Journal of Multiphase Flow, 129, 2020. Crossref
-
Chen Chen, Yu Shenghao, Yin Bifeng, Bi Qinsheng, Jia Hekun, Investigation of inner flow and near-field spray patterns of the non-circular diesel injector, Sādhanā, 47, 1, 2022. Crossref
-
Leng Xianyin, Deng Yicheng, Guan Wei, Xie Weibo, He Zhixia, Wang Qian, Yan Xuesheng, Long Wuqiang, A numerical study on the in-nozzle cavitating flow and near-field jet breakup of a spirally grooved hole nozzle using a LES-VOF method, Fuel, 326, 2022. Crossref
-
Deng Yicheng, Leng Xianyin, Guan Wei, He Zhixia, Long Wuqiang, Wei Shengli, Hu Jie, A numerical study on the in-nozzle cavitating flow and near-field atomization of cylindrical, V-type, and Y-type intersecting hole nozzles using the LES-VOF method, Green Processing and Synthesis, 11, 1, 2022. Crossref