图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.262 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.v12.i123.120
pages 229-245

A COMPARISON OF SPRAY CHARACTERISTICS BETWEEN AN AIR-ASSISTED FUEL INJECTOR AND A HIGH-PRESSURE SWIRL INJECTOR FOR GASOLINE DIRECT-INJECTION ENGINE APPLICATION

C. Jang
Precision Instrument R&D Center, Samsung Techwin Co., Ltd., Sungnam City, Kyungki, Korea

ABSTRACT

The spray characteristics of two preferred injection tools for gasoline direct-injection (DI) application were compared. An air-assisted fuel injector (AAFI) and a high-pressure swirl injector (HPSI) were designed and fabricated, and the characterization strategies and processes for both injector sprays were arranged in parallel. In this article, the overall spray characteristics, defined as spray pattern, penetration, internal spray structure, atomization performance and drop size distribution, are discussed. A spray shape factor is introduced to describe the development of intermittent sprays from both injectors. Axial penetration appears to be almost linear in the case of the AAFI, while its instantaneous speed continuously decreases with time in the HPSI. Large droplets are distributed at the tail end of the AAFI spray, while they are concentrated on the head portion of the HPSI spray. From the viewpoint of mean drop diameter, feasible ranges of injection and of ambient pressure are found to be broader in the HPSI. Drop size distributions of the HPSI are found to be more uniform than those of the AAFI.


Articles with similar content:

TWO COMPONENT VELOCITY AND SIZE MEASUREMENTS FOR A NON-COMBUSTING FUEL SPRAY IN A DIESEL SWIRL COMBUSTION CHAMBER
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
G. Pitcher, G. Wigley
FLOW-FIELD INVESTIGATION OF MULTI-HOLE SUPERHEATED SPRAYS USING HIGH-SPEED PIV. PART I.
CROSS-SECTIONAL DIRECTION

Atomization and Sprays, Vol.22, 2012, issue 11
David J. Cleary, Ming Zhang, Yuyin Zhang, Min Xu, Gaomimg Zhang
SPRAY VISUALIZATION AND HYDRAULIC CHARACTERIZATION OF THE HOLES OF A FIVE-HOLE, VALVE-COVERED-ORIFICE NOZZLE OF AN ELECTRONICALLY CONTROLLED DIESEL INJECTOR
Atomization and Sprays, Vol.6, 1996, issue 3
D. Laforgia, V. Damiani, R. Campanella
EFFECT OF RECESS LENGTH ON THE SPRAY CHARACTERISTICS OF LIQUID-CENTERED SWIRL COAXIAL INJECTORS
Atomization and Sprays, Vol.26, 2016, issue 6
Peng Cheng, Qinglian Li, Zhongtao Kang, Xinqiao Zhang
TIME-RESOLVED CHARACTERIZATION OF LOW-PRESSURE PULSED INJECTOR
Atomization and Sprays, Vol.26, 2016, issue 8
Pramod S. Mehta, Rohit Singh Pathania, Satyanarayanan R. Chakravarthy