每年出版 12 期
ISSN 打印: 1044-5110
ISSN 在线: 1936-2684
Indexed in
A PREFERENTIAL VAPORIZATION MODEL FOR MULTICOMPONENT DROPLETS AND SPRAYS
摘要
A multicomponent vaporization model for spray computations was developed to account for the temperature and concentration nonuniformity inside a droplet due to preferential vaporization and finite diffusion processes. The effect of internal circulation was also included using effective diffusivity. The model was validated through rigorous tests and the results agreed well with accurate finite-difference solutions for temperature temporal variations of nonvaporizing droplets and with the measured mole fraction temporal variations of bi-component droplets. The model was also applied to investigate the vaporization of solid-cone sprays and physical insights on preferential vaporization were revealed. Throughout the tests, comparisons with the widely used infinite diffusion model (limited accuracy, low computational cost) and the simplified vortex model(high accuracy, high cost) were also made. Overall, the accuracy of the present model is close to that of the simplified vortex model, while the computational cost is comparable to that of the infinite diffusion model.
-
Mukhopadhyay Achintya , Sanyal Dipankar , A Semi-Analytical Model for Evaporating Fuel Droplets , Journal of Heat Transfer, 127, 2, 2005. Crossref
-
Zeng Yangbing , Lee C. F. , Computations of Air/Fuel Preparation Process in a Port-Injected Spark-Ignition Engine During Cold-Starting Phase , Journal of Engineering for Gas Turbines and Power, 126, 3, 2004. Crossref
-
Lei S., Turan A., Nonlinear/chaotic analysis, modelling and control of combustion instabilities due to vaporizing sprays, Chaos, Solitons & Fractals, 42, 3, 2009. Crossref
-
Lei S., Turan A., Chaotic modelling and control of combustion instabilities due to vaporization, International Journal of Heat and Mass Transfer, 53, 21-22, 2010. Crossref
-
Sazhin Sergei S., Advanced models of fuel droplet heating and evaporation, Progress in Energy and Combustion Science, 32, 2, 2006. Crossref
-
Sazhin S.S., Abdelghaffar W.A., Krutitskii P.A., Sazhina E.M., Heikal M.R., New approaches to numerical modelling of droplet transient heating and evaporation, International Journal of Heat and Mass Transfer, 48, 19-20, 2005. Crossref
-
LEI S., TURAN A., NONLINEAR/CHAOTIC MODELING AND CONTROL OF COMBUSTION INSTABILITIES, International Journal of Bifurcation and Chaos, 20, 04, 2010. Crossref
-
Zhang Peng, Experimental research on flash boiling spray of dimethyl ether, Journal of Marine Science and Application, 13, 4, 2014. Crossref
-
Liye Song, Weizheng Zhang, Ti’en Zhang, Zhaoju Qin, A new approach to transient evaporating film heating modeling based on analytical temperature profiles for internal combustion engines, International Journal of Heat and Mass Transfer, 81, 2015. Crossref
-
Xu Zhengxin, Zhao Zhichao, Li Juncheng, Wang Mianzhi, Liu Jingping, Lee Chia-Fon, Chang Wayne, Hou Jie, A Reduced Chemical Kinetic Mechanism of Toluene Reference Fuel (toluene/n-heptane) for Diesel Engine Combustion Simulations, SAE Technical Paper Series, 1, 2015. Crossref
-
Xu Zheng, Yi Jianwen, Wooldridge Steven, Reiche David, Curtis Eric W., Papaioannou George, Modeling the Cold Start of the Ford 3.5L V6 EcoBoost Engine, SAE International Journal of Engines, 2, 1, 2009. Crossref
-
Wang Dongyao, Lee Chia-fon F., Zeng Yangbing, Modeling of Air Fuel Mixing in a Stratified Gasoline Direct Injection Engine Using Multicomponent Fuel Representation, SAE Technical Paper Series, 1, 2003. Crossref
-
Huo MIng, Wang Mianzhi, Lee Chia-Fon, Computational Study of the Equivalence Ratio Distribution from a Diesel Pilot Injection with Different Piston Geometry, Injection Timing and Velocity Initialization in a HSDI Engine, SAE Technical Paper Series, 1, 2014. Crossref
-
Xu Zheng, Yi Jianwen, Curtis Eric W., Wooldridge Steven, Applications of CFD Modeling in GDI Engine Piston Optimization, SAE International Journal of Engines, 2, 1, 2009. Crossref
-
Wang Mianzhi, Xu Zhengxin, Li Menghan, Lee Chia-Fon, Numerical Study and Parameter Optimization on a Diesel - Natural Gas Dual Fuel Engine, SAE Technical Paper Series, 1, 2016. Crossref
-
Antonov D. V., Vysokomornaya O. V., Kuznetsov G. V., Piskunov M. V., Modeling the Water Droplet Evaporation Processes with Regard to Convection, Conduction and Thermal Radiation, Journal of Engineering Thermophysics, 27, 2, 2018. Crossref
-
Gao Suya, Wang Mianzhi, Lee Chia-Fon, NOx Reduction in Compression-Ignition Engine by Inverted Ignition Phi-Sensitivity, SAE Technical Paper Series, 1, 2017. Crossref
-
Li Yuqiang, Chen Yong, Wu Gang, A new skeletal mechanism for diesel-n-butanol blends combustion in engine, Fuel, 264, 2020. Crossref
-
Antonov , Volkov , Strizhak , Gas-Vapor Mixture Temperature in the Near-Surface Layer of a Rapidly-Evaporating Water Droplet, Entropy, 21, 8, 2019. Crossref
-
Antonov Dmitry V., Strizhak Pavel A., Heating, evaporation, fragmentation, and breakup of multi-component liquid droplets when heated in air flow, Chemical Engineering Research and Design, 146, 2019. Crossref
-
Gao Suya, Yan Junhao, Wang Mianzhi, Lee Chia-Fon, Modeling of Quasi-1D Multi-Component Fuel Droplet Vaporization using Discrete Approach with Experimental Validation, SAE Technical Paper Series, 1, 2018. Crossref
-
Gao Suya, Lee Chia-Fon, High-Load Compression-Ignition Engine Emissions Reduction with Inverted Phi-Sensitivity Fuel Using Multiple Injection Strategies, SAE Technical Paper Series, 1, 2019. Crossref
-
Sazhin Sergei, Heating of Non-evaporating Droplets, in Droplets and Sprays, 2014. Crossref
-
Xu Zhengxin, Duan Xiongbo, Liu Yiqun, Deng Banglin, Liu Jingping, Spray combustion and soot formation characteristics of the acetone-butanol-ethanol/diesel blends under diesel engine-relevant conditions, Fuel, 280, 2020. Crossref
-
Volkov R.S., Strizhak P.A., Using Planar Laser Induced Fluorescence and Micro Particle Image Velocimetry to study the heating of a droplet with different tracers and schemes of attaching it on a holder, International Journal of Thermal Sciences, 159, 2021. Crossref
-
Li Yuqiang, Chen Yong, Wu Gang, Skeletal Mechanism Generation and Validation for Acetone–n-butanol–ethanol (ABE) Combustion in Diesel Engine, Energy & Fuels, 34, 1, 2020. Crossref
-
Li Yuqiang, Zhao Junhong, Calvin Laurent Tcheteu Djike, Wu Gang, Development of a skeletal combustion mechanism for natural gas engine using n-butanol-diesel blend as pilot fuel, Fuel, 305, 2021. Crossref
-
Li Yuqiang, Lou Bingqian, Tang Wei, Abubakar Shitu, Liu Gang, A more realistic skeletal mechanism with compact size for n-butanol combustion in diesel engines, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 235, 12, 2021. Crossref
-
Duan Xiongbo, Xu Zhengxin, Sun Xingyu, Deng Banglin, Liu Jingping, Effects of injection timing and EGR on combustion and emissions characteristics of the diesel engine fuelled with acetone–butanol–ethanol/diesel blend fuels, Energy, 231, 2021. Crossref
-
Li Yuqiang., Cao Zheng, Chen Yong, Wu Gang, A synthetic skeletal mechanism for combustion simulation of acetone-n-butanol-ethanol mixture and its components in diesel engines, Fuel, 290, 2021. Crossref
-
Sazhin Sergei S., Heating of Non-evaporating Droplets, in Droplets and Sprays: Simple Models of Complex Processes, 2022. Crossref