图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
界面现象 及传热
ESCI SJR: 0.258 SNIP: 0.574 CiteScore™: 0.8

ISSN 打印: 2169-2785
ISSN 在线: 2167-857X

界面现象 及传热

DOI: 10.1615/InterfacPhenomHeatTransfer.2013007038
pages 29-49

DETERMINATION OF APPARENT CONTACT ANGLE AND SHAPE OF A STATIC PENDANT DROP ON A PHYSICALLY TEXTURED INCLINED SURFACE

Gaurav Bhutani
Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur 208016, India
Krishnamurthy Muralidhar
Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur 208016, India
Sameer Khandekar
Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur (UP) 208016, India

ABSTRACT

Estimating the apparent contact angle under equilibrium conditions is critical for the understanding of several engineering processes. Some examples are dropwise condensation, digital microfluidics, and material deposition schemes. Often, there is considerable uncertainty in the experimental estimation of the contact angle. In this work, we discuss the contact angles and shapes of pendant drops on physically textured inclined surfaces. Two methodologies to determine the apparent contact angles have been employed. In one approach these are obtained from drawing tangents at contact points of micro-droplets in optical images using digital image processing. In the second method, the three-dimensional (3D) Young–Laplace equation is numerically solved using the open-source software, Surface Evolver, by minimizing the sum of the potential and surface energies of the pendant droplet. A section of the numerically obtained 3D droplet shape is then fitted to the experimentally obtained two-dimensional profile using an inverse method. Advancing and receding angles of the imaged drop are calculated by minimizing the error between the numerical and experimental drop shapes, providing good estimates of these angles. In addition, the complete 3D droplet shape is also obtained. The overall methodology presented herein is generic, although the experiments have been conducted with glycerin as the working fluid. The role of surface roughness, plate inclination, and drop volume on the advancing and receding angles of a pendant drop are discussed. On inclined surfaces, the three-phase contact line does not remain pinned and its shape is not circular. The receding angle progressively diminishes with inclination while the advancing angle remains nearly constant.


Articles with similar content:

EVOLUTION OF LIQUID MENISCUS SHAPE IN A CAPILLARY TUBE
ICHMT DIGITAL LIBRARY ONLINE, Vol.11, 2004, issue
H. D. Lee, Shong-Leih Lee
The wetted area fraction of dropwise condensation with inert gases and drop drainage
International Heat Transfer Conference 12, Vol.50, 2002, issue
Cees W. M. van der Geld, F.L.A. Ganzevles
NUMERICAL INVESTIGATION OF A DROP/SURFACE INTERACTION
International Heat Transfer Conference 13, Vol.0, 2006, issue
M. Benyettou, H. Alla
FLOW VISUALIZATION IN EVAPORATING LIQUID DROPS AND MEASUREMENT OF DYNAMIC CONTACT ANGLES AND SPREADING RATE
Journal of Flow Visualization and Image Processing, Vol.8, 2001, issue 2-3
Nengli Zhang , David F. Chao
WALL FUNCTIONS FOR ARBITRARILY ROUGH SURFACES WITH APPLICATION TO SEDIMENT MORPHODYNAMICS
TSFP DIGITAL LIBRARY ONLINE, Vol.5, 2007, issue
David D. Apsley