RT Journal Article ID 044906294d8e29b3 A1 Chen, Zhongjia A1 Zhang, Qingchuan A1 Wu, Xiaoping T1 Multiscale Analysis and Numerical Modeling of the Portevin-Le Chatelier Effect JF International Journal for Multiscale Computational Engineering JO JMC YR 2005 FD 2005-06-07 VO 3 IS 2 SP 227 OP 237 AB The Portevin-Le Chatelier (PLC) effect refers to one type of plastic instability, which often manifests itself as discontinuous yielding and localized deformation in some metallic alloys deformed under certain conditions. A phenomenological model based on a multiscale analysis is developed to investigate the PLC effect. In this model, a new component of stress is introduced, which takes account of the collective interactions between mobile dislocations and solute atoms, to describe the influence of dynamic strain aging (DSA) on the flow stress. The effects of microscopic pinning and unpinning of dislocations on the macroscopic deformation behavior are considered in an integrative and competitive manner. Due to the competition of these two effects during deformation, the alloys may exhibit the negative strain rate sensitivity of flow stress, which is a necessary condition for the occurrence of the PLC effect. A nonuniform spatial distribution of some material parameters was used in the model to reflect the heterogeneous nature of the deformed material, including a linear change of the initial cross-sectional area and a random perturbation of the initial internal stress. Numerical simulations based on this heterogeneous model were carried out for tensile testing of aluminum alloy 2017, by which the serrated yielding and localized deformation behavior were successfully reproduced. The results also indicate the relation between the macroscopic jerky flow and the pinning/unpinning of dislocations at the micro level. PB Begell House LK https://www.dl.begellhouse.com/journals/61fd1b191cf7e96f,10820c0a715cf8ed,044906294d8e29b3.html