RT Journal Article ID 6ba9cbc83b56ccf8 A1 Yan, Shi A1 Cheng, Yi A1 Li, Yan-Chun A1 Li, Wen A1 Huang, Chuan T1 METHOD TO INCREASE THE ACTIVE CONTENTS OF PARTIALLY OXIDIZED BORON PARTICLES AND PERFORMANCE OF B/PB3O4 COMPOSITES WITH TREATED BORON JF International Journal of Energetic Materials and Chemical Propulsion JO IJEMCP YR 2013 FD 2013-07-03 VO 12 IS 1 SP 61 OP 73 K1 boron treatment K1 combustion K1 boron/lead oxide composites K1 thermal analysis AB The treatment of partially oxidized boron was investigated to increase the active boron contents. Long-stored boron samples were washed by distilled water and ethanol. The washed boron samples were termed BW (with water) and BE (with ethanol), then BW and BE were separately mixed with lead oxide (Pb3O4) to form B/Pb3O4 composites. The mass fractions of boron in B/Pb3O4 composites were 2, 2.5, 3, 3.5, 4, 4.5, and 5 wt %. B/Pb3O4 composites were loaded into iron tubes and consolidated with a pressure of 312.5 MPa. The combustion time of B/Pb3O4 composite was measured by the optical target method. Results show that the burning rate of BE/Pb3O4 composite is on average 2.2 times of the burning rate of BW/Pb3O4. Thermogravimetry and differential scanning calorimetry were conducted to compare the thermal decomposition reaction and the stability of the BW/Pb3O4 and BE/Pb3O4 composites. PB Begell House LK https://www.dl.begellhouse.com/journals/17bbb47e377ce023,2532f2da6df939c6,6ba9cbc83b56ccf8.html