Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
Nanoscience and Technology: An International Journal
ESCI SJR: 0.228 SNIP: 0.484 CiteScore™: 0.37

ISSN Druckformat: 2572-4258
ISSN Online: 2572-4266

Nanoscience and Technology: An International Journal

Formerly Known as Nanomechanics Science and Technology: An International Journal

DOI: 10.1615/NanoSciTechnolIntJ.v8.i3.20
pages 193-201

THE EFFECT OF THE POLYMER MATRIX ORIENTATION ON THE MECHANICAL PROPERTIES OF POLYVINYL CHLORIDE/BORON NITRIDE NANOCOMPOSITES

Georgii V. Kozlov
Kh.M. Berbekov Kabardino-Balkarian State University, 173 Chernyshevsky Str., Nal'chik, 360000, Russia
Yulia N. Karnet
Institute of Applied Mechanics, Russian Academy of Sciences, 7 Leningradsky Ave., Moscow, 125040, Russian Federation
I. V. Dolbin
Kh.M. Berbekov Kabardino-Balkarian State University, 173 Chernyshevsky Str., Nal'chik, 360000, Russia
A. N. Vlasov
Institute of Applied Mechanics, Russian Academy of Sciences, 7 Leningradsky Ave., Moscow, 125040, Russian Federation

ABSTRAKT

The change in the type of the reinforcing component and, hence, the category of nanostructured polyvinyl chloride/boron nitride composites, has a decisive influence on the main mechanical characteristics (the degree of reinforcement and strength) of these nanomaterials. These changes can be described in quantitative terms within the framework of the percolation model of reinforcement. It is shown that when anisotropic plates of 2D nanofiller reach the percolation threshold both the degree of reinforcement and the strength of nanocomposites decrease strongly.


Articles with similar content:

THEORETICAL AND EXPERIMENTAL STUDIES OF THE ANISOTROPY OF MECHANICAL PROPERTIES OF REINFORCED ELASTOMER NANOCOMPOSITES
Nanoscience and Technology: An International Journal, Vol.4, 2013, issue 3
K. A. Mokhireva, Lyudmila A. Komar
Phonon Transport in Nanoporous Solids and Porous Crystals
International Heat Transfer Conference 12, Vol.1, 2002, issue
Massoud Kaviany
EFFECT OF THE PHASE STATE OF A POLYMER MATRIX ON THE DEGREE OF REINFORCEMENT OF POLYMER ORGANOCLAY NANOCOMPOSITES
Nanoscience and Technology: An International Journal, Vol.9, 2018, issue 2
Georgii V. Kozlov, A. N. Vlasov, I. V. Dolbin, Yulia N. Karnet
DEVELOPMENT AND CHARACTERIZATION OF RICE HUSK-FILLED GLASS FIBER-REINFORCED EPOXY BIOCOMPOSITES
Composites: Mechanics, Computations, Applications: An International Journal, Vol.3, 2012, issue 2
Arun Kumar Rout, Alok Satapathy
TAGUCHI OPTIMIZATION OF PROCESS PARAMETERS IN FRICTION STIR WELDING OF THE AA7010–SiC–Al2O3 HYBRID COMPOSITE
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.20, 2016, issue 3
K. Siva, Ponnusamy Gopi Krishnan