Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
Composites: Mechanics, Computations, Applications: An International Journal
ESCI SJR: 1.182 SNIP: 0.125 CiteScore™: 0.23

ISSN Druckformat: 2152-2057
ISSN Online: 2152-2073

Composites: Mechanics, Computations, Applications: An International Journal

DOI: 10.1615/CompMechComputApplIntJ.v9.i1.30
pages 27-40

RESIDUAL STRESS PREDICTION IN POROUS CFRP USING ARTIFICIAL NEURAL NETWORKS

Guilherme Ferreira Gomes
Mechanical Engineering Institute, Federal University of Itajubá (UNIFEI), Av. BPS, 1303, Itajubá, Brazil
Antonio Carlos Ancelotti, Jr.
Mechanical Engineering Institute, Federal University of Itajubá (UNIFEI), Av. BPS, 1303, Itajubá, Brazil
Sebastião Simões da Cunha, Jr.
Mechanical Engineering Institute, Federal University of Itajubá (UNIFEI), Av. BPS, 1303, Itajubá, Brazil

ABSTRAKT

The use of composite materials, especially the ones made of carbon fiber/epoxy, has considerably increased for structural applications in the aerospace industry. One of the most common defects related to composite processing refers to void formation or porosity. In general, porosity causes reduction of the mechanical properties of composites and therefore it is important to evaluate the behavior of this material in the presence of this type of defect. The porosity level was taken as the input of the network. Four fatigue test data groups were used in this work, three for the training state and one set of data for validation. The ultimate strength prediction was performed with an artificial neural network backpropagation algorithm. The neural network results showed that the application of the Levenberg–Marquardt learning algorithm leads to a high predictive ultimate strength quality.


Articles with similar content:

EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF EFFECTIVE THERMAL CONDUCTIVITY OF LOW-DENSITY POLYETHYLENE FILLED WITH Ni AND NiO PARTICLES
Composites: Mechanics, Computations, Applications: An International Journal, Vol.3, 2012, issue 1
Rajpal S. Bhoopal, Ramvir Singh, Dharmendra Tripathi, Madhusree Kole, T.K. Dey
PREDICTION OF EFFECTIVE THERMAL CONDUCTIVITY OF POLYMER COMPOSITES USING AN ARTIFICIAL NEURAL NETWORK APPROACH
Special Topics & Reviews in Porous Media: An International Journal, Vol.3, 2012, issue 2
P. K. Sharma, Rajpal S. Bhoopal, Ramvir Singh, R. S. Beniwal, Sajjan Kumar, Alok Pandey
PREDICTION OF THE MECHANICAL PROPERTIES OF COPPER POWDER-FILLED LOW-DENSITY POLYETHYLENE COMPOSITES. A COMPARISON BETWEEN THE ANN AND THEORETICAL MODELS
Composites: Mechanics, Computations, Applications: An International Journal, Vol.6, 2015, issue 1
P. K. Sharma, A. S. Luyt, Ramvir Singh, R. S. Bhoopal
APPLICABILITY OF ARTIFICIAL NEURAL NETWORKS TO PREDICT EFFECTIVE THERMAL CONDUCTIVITY OF HIGHLY POROUS METAL FOAMS
Journal of Porous Media, Vol.16, 2013, issue 7
P. K. Sharma, Rajpal S. Bhoopal, Ramvir Singh, R. S. Beniwal
METHODS FOR PREDICTING EFFECTIVE THERMOELASTIC PROPERTIES OF COMPOSITE CERAMICS REINFORCED WITH CARBON NANOTUBES
Nanoscience and Technology: An International Journal, Vol.3, 2012, issue 2
Sergey A. Lurie, Yury O. Solyaev, D. D. Ivanova, A. A. Kasimovskii