Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
Heat Transfer Research
Impact-faktor: 0.404 5-jähriger Impact-Faktor: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Druckformat: 1064-2285
ISSN Online: 2162-6561

Volumes:
Volumen 50, 2019 Volumen 49, 2018 Volumen 48, 2017 Volumen 47, 2016 Volumen 46, 2015 Volumen 45, 2014 Volumen 44, 2013 Volumen 43, 2012 Volumen 42, 2011 Volumen 41, 2010 Volumen 40, 2009 Volumen 39, 2008 Volumen 38, 2007 Volumen 37, 2006 Volumen 36, 2005 Volumen 35, 2004 Volumen 34, 2003 Volumen 33, 2002 Volumen 32, 2001 Volumen 31, 2000 Volumen 30, 1999 Volumen 29, 1998 Volumen 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2015007515
pages 735-749

AN INVERSE HEAT CONDUCTION MODEL FOR DETERMINING THE CASTING/CHILL INTERFACIAL HEAT TRANSFER COEFFICIENT

Liqiang Zhang
College of Mechanical and Electrical Engineering, Central South University of Forestry and Technology, Changsha, 410004, Hunan, P. R. China; State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, 410082
Luoxing Li
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, 410082, Hunan, P. R. China

ABSTRAKT

The interfacial heat transfer coefficient (IHTC) is required for accurate simulation of the casting process. However, it cannot be easily obtained simply by using either experimental or theoretical methods. Using measured temperature data, an inverse method can be used to predict the IHTC. However, the latent heat released during the solidification of a molten metal complicates the associated temperature and IHTC calculations. To overcome this difficulty, an equivalent specific heat method is applied in this study to calculate the IHTC for the casting process. It is found that the identified IHTC varies with time during castings solidification. The IHTC values calculated for an aluminum alloy casting of simple geometry cast on a steel chill vary from 1200 to 3500 W·m−2·K−1. Application of the indentified IHTC in the forward heat conduction model with the same boundary condition allows comparison between numerically calculated and experimentally obtained results for validation of the method. The results show that the numerically calculated temperatures are in good agreement with those measured experimentally. This confirms that the proposed method is a feasible and effective tool for determining the casting-mold IHTC. Additionally, the characteristics of the time−varying IHTC have also been discussed.


Articles with similar content:

INTERFACIAL THERMAL CONTACT DURING RAPID SOLIDIFICATION ON A SUBSTRATE
International Heat Transfer Conference 10, Vol.9, 1994, issue
G.-X. Wang , E.F. Matthys
STUDY ON FROST FORMATION AND HEAT TRANSFER INSIDE A CRYOGENIC TUBE
International Heat Transfer Conference 11, Vol.20, 1998, issue
Gang Pan , Huier Cheng, Hui Ying Wu
COMBINED NUMERICAL AND ANALYTICAL METHOD FOR FIN ARRAY HEAT TRANSFER
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2012, issue
Kaj Lampio, Reijo Karvinen
THE INFLUENCE OF THE THERMAL DlFFUSIVITY OF THE CONDENSER MATERIAL ON THE HEAT TRANSFER COEFFICIENT IN DROPWISE CONDENSATION
International Heat Transfer Conference 7, Vol.11, 1982, issue
Johannes Straub, Ulrich Grigull, P. Waas
A STUDY ON COMPARISON OF VOLUME AVERAGED AND PORE SCALE RESULTS OF SOLID/LIQUID PHASE CHANGE ASSISTED BY POROUS MEDIA
International Heat Transfer Conference 16, Vol.14, 2018, issue
Fujio Kuwahara, C. Y. Wang, Moghtada Mobedi, Akira Nakayama