Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
Heat Transfer Research
Impact-faktor: 0.404 5-jähriger Impact-Faktor: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Druckformat: 1064-2285
ISSN Online: 2162-6561

Volumes:
Volumen 50, 2019 Volumen 49, 2018 Volumen 48, 2017 Volumen 47, 2016 Volumen 46, 2015 Volumen 45, 2014 Volumen 44, 2013 Volumen 43, 2012 Volumen 42, 2011 Volumen 41, 2010 Volumen 40, 2009 Volumen 39, 2008 Volumen 38, 2007 Volumen 37, 2006 Volumen 36, 2005 Volumen 35, 2004 Volumen 34, 2003 Volumen 33, 2002 Volumen 32, 2001 Volumen 31, 2000 Volumen 30, 1999 Volumen 29, 1998 Volumen 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2013006087
pages 473-482

NUMERICAL SIMULATION OF THE AIR FLOW FIELD IN THE MELT BLOWING PROCESS WITH THE USE OF AN AUXILIARY NOZZLE

Yuanling Cheng
College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, Suzhou 215006, China
Lili Wu
College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, Suzhou 215006, China
Ting Chen
College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, Suzhou 215006, China

ABSTRAKT

The melt blowing process can produce ultrafine fibers. Adding an auxiliary nozzle is helpful to further decrease the fiber diameter. The air flow field of the melt blowing process with the use of an auxiliary nozzle is simulated numerically. The simulation results are compared with analytical calculation results and experimental data. The results provide a good foundation for modeling the polymer drawing in our further researches on improving the melt blowing technology.


Articles with similar content:

EFFECT OF OSCILLATING AIR JETS ON POLYMER DRAWING IN THE MELT BLOWING PROCESS
Heat Transfer Research, Vol.44, 2013, issue 5
Ting Chen, Lili Wu
AN ATTEMPT TO INCORPORATE THE EFFECT OF MICROSTRUCTURE ON THE MACROSCALE SIMULATION OF HEAT TRANSFER DURING HEAT TREATMENT IN MULTI COMPONENT DUAL PHASE STEEL
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Gandham Phanikumar, Deepu Mathew John, Aravind Babu
INVESTIGATION OF THE EFFECT OF ELASTIC DEFORMATIONS OF THE WING MODEL OF A WIDE-BODY COMMERCIAL TRANSPORT AIRCRAFT ON ITS AERODYNAMIC CHARACTERISTICS
TsAGI Science Journal, Vol.49, 2018, issue 7
Valery Viktorovich Vozhdaev, Leonid Leonidovich Teperin
INVESTIGATION OF THE HEAT TRANSFER ENHANCEMENT FROM JET FILM HEATING ON AERO-ENGINE NOSE CONE
International Heat Transfer Conference 16, Vol.14, 2018, issue
Xing Tang , Yi Lu , Huiyun Yang , Peng Ke
NUMERICAL STUDY OF JET IMPINGEMENT HEAT TRANSFER INSIDE AERO-ENGINE INLET STRUT WITH FILM-HEATING ANTI-ICING SYSTEM
International Heat Transfer Conference 16, Vol.14, 2018, issue
Xing Tang , Yi Lu , Peng Ke , Fang yong Li , Chunxin Yang